Manual Nuk Eco Control Video Display 550VD - 10749102 (page 29 of 36) (English)

803238

Zoom out

Zoom in

1/36

Press any key to silence the alarm and tem-

porarily deactivate it. However, the tempera-

ture alarm will continue to be signalled until

the temperature in the monitored room is

back within the set limits.

The current room temperature in the moni-

tored room is displayed in the status bar.

Notes:

• If you activate the temperature alarm

function without setting your own limits

first, the default limit values will be used,

i.e., MIN = < 15°C and MAX = > 30 °C.

• After 15 seconds without any input from

you, the menu will be closed with the

settings unchanged and the parent unit

will return directly to monitoring mode.

Deactivating the temperature alarm

Press any key to silence the alarm and tem-

porarily deactivate it. However, the tempera-

ture alarm will continue to be signalled until

the temperature in the monitored room is

back within the set limits.

The current room temperature in the moni-

tored room is displayed in the status bar.

To deactivate the temperature alarm, pro-

ceed as follows:

1. Follow steps 1 to 3 described above.

4. Use the 25 or 28 button to move the

star in front of "ALARM".

5. Press the button 26 to view the next

submenu.

ON: The temperature alarm function will

be activated and you will be notified if the

temperature rises above or falls below

the set limits.

OFF: The temperature alarm is deacti-

vated. You will receive no notification if

the temperature in the monitored room

rises above or falls below the set limits.

6. Use the 25 or 28 button to move the

star in front of "OFF".

7. Press the button 26 to confirm your

setting.

The setting will be stored, the menu will

be closed, and the parent unit will return

directly to monitoring mode.

Note: After 15 seconds without any input

from you, the menu will be closed with the

settings unchanged and the parent unit will

return directly to monitoring mode.

6.11 Lullabies

This NUK baby monitor has four specially

composed lullabies and soothing natural

sounds. To calm your baby and lull it to

sleep, the lullabies can be activated from

the parent unit at any time without needing

to enter the monitored room. The lullabies

are then played over the loudspeaker 14 of

the baby unit.

Attention!

• We recommend keeping video monitor-

ing or audio monitoring on while the lulla-

bies are playing so that you can hear and

see baby's responses.

• If the parent unit is switched to audio

monitoring only, i.e., video monitoring

has been deactivated (see "6.9 Switching

between audio and video monitoring" on

page 63), you will not be able to switch

the parent unit to mute. This prevents you

from losing all contact with your baby

while using the baby monitor.

• Please note that activating the lullabies

will automatically deactivate Eco-Mode if

it is active (see "4.5 Eco-Mode and Full-

Eco-Control" on page 52) and could

wake your baby.

Notes:

• Alternatively, you can switch the lullabies

on and off from the baby unit itself (see

"5.4 Playing the lullabies" on page 54).

• The five LEDs 22 are switched off while

lullabies are playing, because the device

cannot distinguish between a baby

crying and a lullaby being played, You will

still be able to hear any sounds baby

makes over the lullabies.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Video Display 550VD - 10749102 in the language / languages: English as an attachment in your email.

The manual is 0.54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nuk Eco Control Video Display 550VD - 10749102 Manual

Product: