803238
27
Zoom out
Zoom in
Previous page
1/36
Next page
65
6. Use the 25 or 28 button to move the
star in front of "LCD Auto Off".
7. Press the button 26 to view the next
submenu.
5 Min: The screen will switch itself off
after 5 minutes.
1 Min: The screen will switch itself off
after 1 minute.
OFF: The screen will remain on.
The active setting will be shown in green.
8. Use the 25 or 28 button to move the
star in front of the required time.
9. Press the button 26 to confirm your
setting.
The setting will be stored, the menu will
be closed, and the parent unit will return
directly to monitoring mode.
Note: If Eco-Mode is active while the screen
is switched off, you can still change a set-
ting in the main menu, but the screen will
otherwise be white, as video transmission is
deactivated in Eco-Mode. This is no cause
for concern - the device is still working as
intended. It simply means that Eco-Mode
has paused the video transmission because
your baby is asleep (see "4.5 Eco-Mode and
Full-Eco-Control" on page 52).
6.10 Room temperature
settings
The correct room temperature is particularly
important for baby’s healthful sleep. The
baby unit of this NUK baby monitor there-
fore has an integrated temperature sensor.
The temperature in baby's room is perma-
nently shown on the screen 19 and updated
automatically.
Note: Since the temperature sensor is inside
the baby unit it is important that you do not
cover it or place it near a heater. Direct sun-
light may also affect the reading.
The baby unit monitors the room
temperature and sends an alarm to the
parent unit when the set temperature limits
are exceeded.
Setting the temperature unit °C or °F:
1. Press the button 26.
The menu bar with the main menu will
appear at the bottom of the screen.
2. Use the 24 or 27 button to
select the Temperature menu.
The selected symbol will be shown in red.
3. Press the button 26 to view the sub-
menu.
The temperature submenu has three set-
tings you can adjust:
°C/°F: Allows you to choose the unit of
temperature shown in the status bar of
the parent unit.
LIMIT: Allows you to set the upper and
lower limits for the temperature alarm.
ALARM: Allows you to enable and disa-
ble the temperature alarm when the room
temperature rises above or falls below
the set limits.
4. Use the 25 or 28 button to move the
star in front of "°C/°F".
At this point, you can still exit the sub-
menu by pressing the button 27. The
submenu will close and you will be
returned to the previous submenu. How-
ever, to continue with your settings, con-
tinue with the next step.
5. Press the button 26 to view the next
submenu.
The active setting will be shown in green.
6. Use the 25 or 28 button to move the
star in front of the required unit of tem-
perature.
At this point, you can still exit the sub-
menu by pressing the button 27. The
submenu will close and you will be
returned to the previous submenu. How-
ever, to continue with your settings, con-
tinue with the next step.
7. Press the button 26 to confirm your
setting.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Eco Control Video Display 550VD - 10749102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Video Display 550VD - 10749102 in the language / languages: English as an attachment in your email.

The manual is 0.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info