803236
16
Zoom out
Zoom in
Previous page
1/22
Next page
38
6.8 Lullabies
To soothe baby to sleep, you can play
lullabies on the loudspeaker 2 of the baby
unit.
Note: You can alternatively switch the
lullabies on and off from the baby unit itself
(see "5.3 Lullabies" on page 34).
The previously selected lullaby will play in a
loop for about 20 minutes and the “Lullaby”
function will then automatically switch off.
1. You activate the function by briefly pressing
the Lullabies on/off button 21.
The first song will be played and
at the same time the musical note
symbol will appear on the display
15 of the parent unit.
A choice of four different lullabies and one
track of natural sounds are available.
2. You switch to the next song by holding
down the Lullabies on/off button 21.
The musical note symbol on the
display 15 will flash briefly and
then the next song will be
played.
3. You switch the function off by again
briefly pressing the Lullabies on/off
button 21.
The musical note symbol disappears.
Caution! We recommend that you do not
use the mute setting on the parent unit while
lullabies are being played, because this
would leave you with no monitoring
functions at all and quite unable to hear if
your baby cries.
Note: The five LEDs 19 are switched off
while lullabies are playing, because the
device cannot distinguish between a baby
crying and a lullaby being played, but you
will still be able to hear if your baby is crying
in the background.
Lullabies in Eco-Mode
Please note! There are a number of special
features while the babyphone is in Eco-
Mode(see "4.5 Eco-Mode and FULL-ECO-
CONTROL" on page 32):
The “Lullaby” function is temporarily
deactivated so that you do not
inadvertently disturb baby.
In this case the musical note
symbol will flash while the FULL-
ECO-CONTROL function
checks the connection between
the two units.
To prevent the lullabies switching on
later, you can again press the Lullabies
on/off button 21 to immediately cancel
the function. The flashing symbol will
then disappear from the display.
If you choose to switch the lullabies on
anyway, there may be a delay of up to
30 seconds before they begin. In Eco-
Mode, the activation command is not
transmitted until the next range check
is carried out (see "Range check in
Eco-Mode“ on page32).
6.9 Nightlight
The Nightlight function provides for a soft
dim light in the nursery.
Note: You can alternatively switch the
nightlight on and off from the baby unit itself
(see "5.4 Nightlight" on page 34).
1. You activate the function by briefly
pressing the Nightlight on/off button 23.
The nightlight 4 switches on.
The display 15 shows the
lightbulb symbol.
2. You switch the function off by briefly
pressing the Nightlight on/off button 23
again.
The nightlight 4 switches off.
The lightbulb symbol disappears.
Nightlight in Eco-Mode
Please note! There are a number of special
features while the babyphone is in Eco-
Mode(see "4.5 Eco-Mode and FULL-ECO-
CONTROL" on page 32):
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Eco Control Audio 530D - 10256439 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Audio 530D - 10256439 in the language / languages: English as an attachment in your email.

The manual is 0.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info