803236

Nuk Eco Control Audio 530D - 10256439 Manual

14
Zoom out
Zoom in
Previous page
1/22
Next page
36
• The TALK symbol is visible
only while the talk-back
function is active (see "6.7 Talking to your
baby" on page 37).
• The musical note symbol will be
visible only if lullabies have been
activated from the parent unit
(see "6.8 Lullabies" on page 38)
or baby unit (see "5.3 Lullabies" on
page 34).
• The lightbulb symbol will be
visible only if the nightlight has
been activated from the parent
unit (see "6.9 Nightlight" on
page 38) or baby unit (see
"5.4 Nightlight" on page 34).
• The battery symbol is also
always displayed and shows the
battery’s current charge level
(see "4.4 Power supply" on page 31).
• The loudspeaker
symbol always
shows you the
device’s current volume setting (see
"6.4Adjusting the volume control" on page
36 and "6.5Mute setting" on page 36).
If no bars are shown, then the device is
currently muted (see "6.5 Mute setting"
on page 36).
6.4 Adjusting the volume
control
• You can use the VOL + 13 and VOL - 14
buttons to set the volume at which you
hear the sounds emitted by the parent
unit.
Each time you press one of the buttons
you will hear a beep at the volume that is
currently set and the corresponding
LEDs 19 will be illuminated The louder
your chosen setting, the louder will be
any beeps and the more LEDs will light
up.
The display also
shows a number of
bars indicating the
current volume setting. The louder your
chosen setting, the louder the unit will
beep and the more bars will appear.
Note: When the VOX function is set to
low sensitivity (see "6.6 Using the VOX
function to adjust the transmission
sensitivity" on page 37), then quiet
sounds will not be transmitted regardless
of the volume setting. This means that
turning up the volume will not enable you
to hear anything more. If you want to hear
more of the sounds from the nursery you
will need to increase the transmission
sensitivity by selecting a higher VOX
level.
6.5 Mute setting
The parent unit can be “MUTED”. Sounds
from the nursery will then no longer be
transmitted.
1. Press the VOL - 14 button repeatedly
until no more beeps are heard.
No further sounds will be transmitted.
The display 15 shows
the loudspeaker symbol
with no bars.
The LEDs 19 will continue to indicate the
noise level in the nursery. The more LEDs
are lit the louder are the noises in the
nursery.
2. You can cancel the mute setting by
pressing the VOL + 13 key.
3. If the parent unit is muted and you
activate the talk-back function, the
volume will automatically return to the
first level.
Caution!
If you mute the parent unit and also activate
the lullabies then you will no longer have any
active monitoring function. The five LEDs
that display the volume 19 are switched off
while a lullaby is playing. If you also mute
the device then you will neither be able to
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Eco Control Audio 530D - 10256439 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Eco Control Audio 530D - 10256439 in the language / languages: English as an attachment in your email.

The manual is 0.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info