589435

NTech Skywatch GEOS 11 Manual

32
Zoom out
Zoom in
Previous page
1/40
Next page
32
the button, then keep the button down ( flashes on the upper
block). In the calibration mode (opposite screen), release the button. Set
the time: pressing briefly on the
button will change the direction of
the setting (
increment and decrement), and short and long pushes on
the
button are used to change the value. Once the adjustment is made,
keep the
button down for 2 seconds to confirm your setting and exit
the calibration mode.
Permanent operation
The instrument remains constantly on (it no longer turns off).
To set the instrument in permanent operation, switch it off
manually (please refer to the Section entitled “Turning the
Instrument Off”), then during the countdown leading to the
stop, release the button and press briefly on the
button; the
instrument displays
, which means that it has
switched to the permanent operation state. To go back to the ‘Automatic
Stop’ state, redo the same operation, or switch the instrument off.
If the instrument remains constantly turned on, the battery is
depleted faster, keep that in mind!
Data transfer to a PC
This requires the use of the interface and the SkywatchLog
software (available as an option). SkywatchLog itself controls the
instrument remotely.
When the instrument is transferring data to a PC, the screen displays the
message
.
Using induction, the instrument transfers the current sensor readings at a
selected rate. You can set the transmission frequency from 0.5 seconds to
24 hours. Go to the special menu and display the screen of manual
recordings, then press on
for a long time, starts flashing on the
upper block. Release the button as soon as you enter the
calibration function (screen opposite). Select the scrolling
direction by pressing briefly on the
button ( increment
and
decrement), then change the value using the
button ('' = second, ' = minute and h = hour). Please note
that the default value is
(no transmission). Confirm
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NTech Skywatch GEOS 11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NTech Skywatch GEOS 11 in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NTech Skywatch GEOS 11

NTech Skywatch GEOS 11 User Manual - Dutch - 19 pages

NTech Skywatch GEOS 11 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info