589435
31
Zoom out
Zoom in
Previous page
1/40
Next page
31
Storage
The example shown opposite indicates that the instrument
is in the storage state; the clock and sensors have stopped,
and there is no automatic recording. This is the default
state of the instrument when it comes off the production
line, thus avoiding the depletion of the battery if the
instrument is stored for a long period of time.
Should you wish to set the instrument into the storage state
yourself, please proceed as follows: when the instrument is
turned off, keep the 3 buttons pressed down for at least 4
seconds; when the screen shown opposite is displayed,
release the buttons then keep the MOD (
) button down.
The message
means that the ‘storage’
state is activated.
OFF
The instrument is off. Both the screen and sensors are off,
but the clock and automatic recordings are still active.
The instrument switches to the OFF state after being
turned off manually or automatically (please refer to the
Section entitled “Turning the Instrument Off”).
Automatic Stop
The (auto stop) state means that the instrument will
switch off automatically three minutes after one of the
buttons was last pressed (default setting), or when turned
off manually (see Section entitled “Turning the Instrument
Off”).
Whenever it is turned off (whether automatically or
manually), the instrument displays a countdown on the
large block and shows the time left until the auto stop (at
the end of 3 minutes in this case), or the message
if the instrument was set for a state of
permanent operation.
The time elapsed before the automatic stop may be
adjusted (from 20 seconds to 24 hours). Default setting: 3
minutes. To change this time span: turn off the instrument
manually and, when the countdown is displayed, release
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NTech Skywatch GEOS 11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NTech Skywatch GEOS 11 in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NTech Skywatch GEOS 11

NTech Skywatch GEOS 11 User Manual - Dutch - 19 pages

NTech Skywatch GEOS 11 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info