589435
34
Zoom out
Zoom in
Previous page
1/40
Next page
34
simultaneously. When the screen displays all the segments (display test),
release, and once more keep the 3 buttons down simultaneously. When
the screen displays the message
, release the
buttons and press the MOD (
) button down for 2 seconds to confirm.
The instrument displays the message
informing you
that the reset operation has indeed been carried out.
Instrument reset
Remove the batteries for 20 minutes.
Power Supply, Battery Replacement
The instrument is supplied with two new batteries already in place (one
battery for power supply, and one for backup).
As for the diode lamp, it is entirely independent from the instrument, and
is therefore relying on its own batteries for supply (also pre-fitted), which
are the same as those used for the instrument.
Batteries fitted in the instrument
The instrument operates on a 3V ‘button’ type battery, with the reference
CR2032, which is placed behind the lid at the back of the instrument. A
second identical battery is located inside the compartment, thus acting as
a spare battery. Important note: the spare battery is also there to hold the
active battery in place, which means that the instrument can only work
properly when fitted with both batteries.
To replace the battery(ies) of the instrument:
1. Unscrew both screws and then remove lid.
2. Remove both batteries (the top battery is
the spare battery, while the battery located
at the bottom of the compartment supplies
the power).
3. Place the spare battery (provided it is new)
at the bottom of the compartment (+ facing
outward).
4. Put a spare battery back on to the supply
battery in order to keep the latter in place.
The spare battery should be placed “upside
down” on the supply battery (+ against +). Simply use the used
battery if you do not have a new battery.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NTech Skywatch GEOS 11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NTech Skywatch GEOS 11 in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NTech Skywatch GEOS 11

NTech Skywatch GEOS 11 User Manual - Dutch - 19 pages

NTech Skywatch GEOS 11 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info