741774
67
Zoom out
Zoom in
Previous page
1/74
Next page
– 67 –
6.4 Increase and decrease the power level
The extraction tower can be set to 13 power levels, indicated
via the 4 LEDs with increasing intensity per level.
Activate a higher power level if strong odours or vapour are
present. The extraction tower then works at a higher flow rate.
Adjusting the power level:
Increase the power
Brighter
LED(s)
Press
+
Decrease the power
LED(s)
dim
Pr
ess
6.5 Low position of extractor
You can use the button to choose a fixed power (250 m3/h),
while keeping the tower at a low level.
This function could be used for cooking an egg, for example.
Low position of extractor
Switch on
Press and hold
for 2 seconds.
Switch off
Press
Note: You can switch from low to high suction mode by pressing
the
+
button.
6.6 Auto-stop
In order to ensure the extraction does not keep running, the
motor switches off and the extraction tower closes automatically
after 3 hours (if the controller has not been changed during
these 3 hours).
6.7 Concentration of the ventilation
When cooking only on one side of the cooking plate, you can
concentrate the extraction of fumes on this side. Using the
switch you can concentrate the extraction of fumes on the left
or on the right side. This even further increases the efficiency
of the unit.
7 CLEANING INDICATIONS
7.1 Cleaning indication for grease filter

Indication: LED next tot lights
After 20 cooking hours, the LED next to the
symbol will
light up.

Follow the cleaning instructions as described in the
chapter, Cleaning.
After having cleaned and replaced the grease filters, reset the
cleaning indication.
Reset: press the
control key for 3 seconds.
7.2 Cleaning indication for recirculation filter
(only with recirculation)

Indication: LED next to
lights
After a fixed time, the LED lights up next to the symbol
will light up. This indication indicates that the recirculation filter
needs to be regenerated.

Follow the cleaning instructions described in the
recirculation box / filter manual.
After the regeneration and after having replaced the recirculation
filter, reset the cleaning indication.
Reset: press the
control key for 3 seconds.
7.3 I/O module connection
(1801 One Power & 1811 One Pro from v13)
The device can be optional equipped with the Input/Output
module n° 990034.
When the input of the module is used in “closed” input situation
the extraction tower will move to the desired height only the
extraction will not start.
The leds next to the Cleaning indication
and will blink.
The extraction only starts when the input situation is “open”.
The input can be used for example in combination with a
sinwow switch in duct out mode.
When the output of the module is used the relay will close when
the extraction is active.
The output remains closed also 5 minutes after closing the
extraction tower.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy 1811 One Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy 1811 One Pro in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 19,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novy 1811 One Pro

Novy 1811 One Pro Installation Guide - English, German, Dutch, French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info