741774
66
Zoom out
Zoom in
Previous page
1/74
Next page
– 66 –
6 CONTROLLING THE EXTRACTION
TOWER
6.1 Extractor hood control panel
Extraction control
Switch on/lift extraction tower position
1 2 3
6 7
4
5
Decrease extraction speed
1 2 3
6 7
4
5
Increase extraction speed
1 2 3
6 7
4
5
Switch off/lower extraction tower position
1 2 3
6 7
4
5
Extraction speed indication
1 2 3
6 7
4
5
Cleaning indication for grease filter
1 2 3
6 7
4
5
Cleaning indication for recirculation filter (optional)
1 2 3
6 7
4
5
6.2 User modes
This device can be used in the exhaust or recirculation mode
(standard setting upon delivery)
6.2.1 Exhaust mode
The air sucked in is first cleaned by the grease filters before
being removed to the outside. This can be achieved by making
use of a series of channels connected between the device and
a wall exhaust cover.
To set the device in exhaust mode, press and hold the key
combination
+
and
and for 3 seconds when the
extraction tower is closed.
The led next to the Cleaning indication for recirculation filter will
blink 3x.
6.2.2 Recirculation mode
The air sucked in is first cleaned by the grease filters. The scents
are then removed in the recirculation filter before re-entering the
kitchen.
To set the device in recirculation mode (default setting), press
and hold the key combination
+
and
and for 3 seconds
when the extraction tower is closed.
The led next to the Cleaning indication for recirculation filter will
be on for 3 seconds.

INFO: Provide adequate ventilation in the kitchen for
optimal efficiency of the recirculation system.
6.3 Switch on and off and run-out function

WARNING: When the extraction is activated, the
extraction tower automatically rises to the desired
height at the rear of the induction hob. Therefore,
ensure nothing can hinder its movement.
Extraction tower
Switch on
Display
Press
and hold for 2 seconds
LED
lights up
Switch on run-out function
1st LED
blinks
Press
Switch off
LED
off
Press
Run-out function: This function starts at the end of cooking.
For a fixed time, the remaining cooking vapours will be extracted
from the kitchen by the extraction tower at low extraction mode
and at a height of 7 cm. When recirculation is selected, the
filters are also dried.
The run-out time is set to 30 minutes by default in the recirculation
mode and 10 minutes in exhaust mode. It is recommended that
this function be allowed to carry out its function completely. At
the end of the run-out time, the motor and the extraction tower
will automatically switch off and the tower will close.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy 1811 One Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy 1811 One Pro in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 19,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novy 1811 One Pro

Novy 1811 One Pro Installation Guide - English, German, Dutch, French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info