Manual Novy 1811 One Pro (page 69 of 74) (English, German, Dutch, French)

741774

Zoom out

Zoom in

1/74

– 69 –

Clean the glass of the cooking plate

Wipe the surface clean with some washing-up liquid on a

damp cloth or sponge (it is best to do this after every use), then

dry the hob by rubbing with a dry cloth or with kitchen paper.

Always make sure that all cloths used are clean in order to avoid

scratching the surface.

In case of stubborn stains

Heavy contamination and stains (limescale stains, pearl-

like shiny spots) are best removed while the hob is still

warm. For this apply common cleaning agents and cleaning

methods. If this does not work well enough, you can use a

speciﬁc cleaning product for cleaning vitro-ceramic glass

(for example, Vitroclen)

Boiled-over food should ﬁrst be soaked with a wet cloth; the

contamination residues should then be removed with a glass

scraper that is specially designed for ceramic hobs. After this,

clean the hob as described under “Cleaning glass hob”.

Burnt-on sugar and melted plastics are best removed

immediately – while still hot – with a glass scraper. After this,

clean the hob as described under “Cleaning glass hob”. Grains

of dirt/sand may fall on the cooking plate while peeling potatoes

or washing vegetables and may cause scratches when moving

the pans. Therefore, ensure there are no grains left on the

surface.

Discolouration of the hob does not have any inﬂuence on the

operation or strength of the vitro-ceramic. It is not a form of

damage to the hob, but it is a result of residues that have not

been removed and have therefore burnt-in.

Shiny spots occur as a result of wear caused by the base of the

pans, in particular when using cooking pans with an aluminium

bottom or when using the wrong cleaning agents. These can

only be removed with great difﬁculty using common cleaning

agents. If necessary, repeat the cleaning several times.

Due to the use of aggressive cleaning agents and scratching

caused by the pan bases, the glass surface is rubbed off over

the course of time, leaving dark stains.

Do not use the cooking plate as a table top or

for putting utensils on.

Always lift up the pans/pots and do not slide them along the

glass plate.

9.2 Removing and replacing the extraction

tower and emptying the reservoir

Water entering the suction opening is collected in a removable

reservoir (volume 150 ml).

– Press the

button so the tower goes up.

– Hold the tower on both sides with 2 hands.



Do not pull up the tower only by the glass.

The 4 LEDs will ﬂash as soon as the extraction tower is removed

from the suction opening. Do not place the extraction tower on

the hob.

1 Extraction tower

2 Removable reservoir

3 Fixed tank

4 Drawer

You will see the removable reservoir in the opening. Remove

and empty the container, clean if necessary. If this reservoir is

full, the ﬁxed reservoir is ﬁlled. This can be dried with a cloth.

There is also a drawer on the bottom of the appliance. Water

can also collect here. Slide it out of the device to clean it.

After removing the reservoir:

– Place the removable container back into the suction opening.

– Return the extraction tower into the suction opening and

make sure it is sitting straight.

– Press the

button and hold for 2 seconds.



INFO: All parts of the extraction tower, except the

uppermost glass, are dishwasher safe. g

9.3 Cleaning the grease ﬁlters and the

ventilation tower glass

After 20 cooking hours, the LED next to the symbol will

light up.

Remove the suction tower from the cooking plate as described

in section 6.2.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Novy 1811 One Pro in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 19,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novy 1811 One Pro

Novy 1811 One Pro Installation Guide - English, German, Dutch, French - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Novy 1811 One Pro Manual

Product: