707331
28
Zoom out
Zoom in
Previous page
1/37
Next page
28
Send Globals
Press the button to dump the global settings in sysex format.
Ports
This option sets where template and global sysex dumps are sent to.
MIDI O/S Send, Receive
Press the buttons below ‘Send’ or ‘Receive’ on the left-hand display to transmit or listen for an operating system (OS)
dump on the MIDI IN and OUT connectors on the back of the SL MkII. You will be asked to confirm that you want to dump
or update the OS before it will transmit or accept an OS dump.
USB1 OS Receive
Press the button below ‘USB1 O/S Receive’ on the left-hand display to prepare the SL MkII to receive an OS sysex dump
from a computer on USB port 1. You will be asked to confirm that you want to update the OS before it will accept an
OS dump.
Drum Pad Calibration Sub Menu - DrumPads
To begin the drum pad calibration press the P1 up button.
The eight values across the left-hand display correspond to drum pads 1-8. The pad hit velocity value is shown on the
top line (‘---‘ if the pad has not yet been hit) and the calibration value is shown on the bottom line. This first page is for
full velocity (maximum strength hit) calibration:
Hit a pad at full strength to check the current calibration. If the hit velocity value above the pad goes to 127 too easily,
decrease the pad calibration value using the encoder or buttons underneath. This will reduce the sensitivity of the pad,
meaning you need to hit it harder to reach maximum velocity.
Once all 8 drum pads have been set for maximum velocity calibration, press the P1 up button again for soft hit calibration:
Hit a pad softly and view the hit velocity value. If the value does not update when you hit the pad then the threshold is
too high. Use the encoders to adjust the threshold values. Lowering the threshold will increase the sensitivity of the pad
meaning that it will respond to a softer hit.
Calibration Sub Menu - Calibrate
Joystick Calibration
To calibrate the pitch/mod joystick slowly move it from the centre to fully left, then to fully right and back to the centre
again. Do not force the wheel at the end of its travel. Repeat this and look at the value under ‘Pitch’ on the SL MkII display.
It should now reach 0 when the stick is fully left, 255 when it is fully right and 128 when it is at rest in the centre.
Next slowly move the joystick from the bottom, up to the top and then back to the bottom again. Do not force it at the
end of its travel. Repeat this and look at the value under ‘Mod’ on the SL MkII display. It should now reach 127 when the
joystick reaches the top of its travel and 0 when it reaches the bottom.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novation SL MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novation SL MKII in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novation SL MKII

Novation SL MKII User Manual - German - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info