707331
26
Zoom out
Zoom in
Previous page
1/37
Next page
26
Transport - Transprt
When the transport button is active, the transport buttons (re-wind, fast-forward, stop, play, loop, and record) can be set
to have independent settings for each template. For example, some MIDI hardware may respond to MMC (which is the
default for most Advanced Templates), but other hardware may respond to different MIDI messages for transport control.
When set to TEMPLATE, each template can have independent transport settings.
When set to GLOBAL, no matter what template you are using, the transport settings will be the same.
As default, the Global Transport settings are set to communicate with the Automap Server (which then sends Rewire
transport messages to software), however Global Transport settings can be edited. When this option is set to GLOBAL,
editing the transport control parameters from any template will affect the transport controls globally.
Sustain Pedal Polarity - SusPedal
The sustain pedal polarity can be changed here. The options are NormCLSD, NormOPN and Auto.If your sustain
pedal is behaving the wrong way (i.e. a press on the pedal results in ‘open’ rather than ‘closed’) then set the option to
NormCLSD. If your pedal works correctly then set the option to NormOPN. Setting the option to AUTO means that the SL
scans the sustain pedal port on boot up. It will presume that the pedal is in the Open position, and set the sustain pedal
polarity accordingly.
Start-up Sub Menu
Start-up - Startup
Select whether the SL MkII will boot up in Automap mode or in Advanced mode
Start Template - StartTmp
If Template is selected in the startup option, then select the template number that will load on bootup.
Automatic Demonstration - AutoDemo
When set to ON, the SL MkII will run through a demo routine when booting up.
Set AutoDemo to OFF to disable this feature.
Routing Sub Menu
The following abbreviations are used in the Routing menu:
U1: USB Port 1
U2: USB Port 2
M1: MIDI OUT Port 1
M2: MIDI OUT Port 2
USB Port 1 To - USB1To
MIDI data sent from the computer on USB port 1 can be routed to MIDI output port 1 and / or 2.
USB port1 will be displayed as ’SL Mk II (port1)’ when selecting the output port from your DAW software.
MIDI To - MIDITo
MIDI data received at the MIDI In port on the back of the SL MkII can be routed to either USB ports and / or either
MIDI Out ports.
MIDI Clock Output - MClck-Out
MIDI Clock output destination can be set to any, or a combination of the following:
M1, M2, U1, U2.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novation SL MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novation SL MKII in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novation SL MKII

Novation SL MKII User Manual - German - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info