707331
29
Zoom out
Zoom in
Previous page
1/37
Next page
29
Aftertouch Calibration
To calibrate the aftertouch press a keyboard key down with enough pressure to fully engage the aftertouch mechanism
and hold the key in that position. Whilst holding the key down, use encoder 4 to increase the ‘Set’ value from 0. Whilst
increasing the ‘Set’ value watch the ‘Read’ value, which will automatically start increasing from 0. As soon as the ‘Read’
value reaches 127 stop increasing the ‘Set’ value and release the key. Try fully pressing some other keys to make sure that
the ‘Read’ value reaches 127 when the aftertouch mechanism is fully engaged. If it does not reach 127 then increase the
‘Set’ value so that it does (it may only require an increase of 1 or 2).
Keyboard Size Calibration
This option is not displayed on the LCD, but a further calibration available on this page is setting the keyboard size of your
unit. Press the bottom and top keyboard keys at the same time. ‘Octaves’ and the number of octaves on the keyboard (2,
3 or 5) will appear on the display to show that the SL MkII has recognised the correct keyboard size. This should only need
to be done if the LCD shows the incorrect number of octaves when the SL MkII is powering up.
Power
The power source is displayed underneath ‘Power’; ‘USB’, ‘PSU’ will be shown. The power source cannot be set from the
Global menu. Use the power select switch on the back of the SL MkII to set the power source.
WRItInG GLoBAL SEttInGS
To save all global settings, press the WRITE button whilst in the Global menu. It is important to do this after calibrating
the joystick, aftertouch, keyboard size or drum pads. Remember that global settings can be saved regardless of whether
memory protect is set to ‘ON’ or ‘OFF’.
tRAnSPoRt
The second row of buttons below the sliders can either be used as transport control, or for use within the current
template (either as Automap or Advanced mode MIDI buttons).
When lit, the buttons will be available as transport controls. This will also be indicated in the Automap HUD when in
Automap Mode.
In Advanced Mode you can edit the MIDI message the Transport Buttons send in the same way as any other control.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novation SL MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novation SL MKII in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novation SL MKII

Novation SL MKII User Manual - German - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info