37
GB
If the ambient temperature goes beyond
the upper data this means longer operat-
ing time of the compressor, breakdown in
the automatic defrosting increasing tem-
perature in the cooling compartment or
increasing energy consumption.
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet (1) at the bottom in front.
The plastic bag of accessories also
contains two spacers to be fitted into
special holes in the back of the appli-
ance. Fit the spacers into the holes,
taking care to ensure that the arrow
(A) is positioned as shown in Figure.
Then turn them through 45° (arrow
(A) vertical) until they lock into place.
Do not stand the appliance on a sunny
place or close to a radiator or cooker.
If it is unavoidable because of furnishing
and the appliance has to be stood near a
cooker take these minimum distances
into consideration:
In case of gas or electric cooker 3 cm
must be left, when it is less put a 0,5 -
1 cm non-flam insulation between the
two appliances.
In case of oil or coal-fired stove the dis-
tance must be 30 cms since they give
off more heat.
The refrigerator is designed to operate
when it is totally pushed to the wall.
When placing the refrigerator
keep minimal distances recom-
mended in figure.
A : placing it under a wall-cupboard
B : placing it freely
Change of door opening direction
Should the setting-up place or handling
demand it, door-opening direction can be
refitted from right-handed to left-handed.
Appliances on the market are right-hand-
ed.
Following operations are to be done on
the basis of figures and explanations:
Disconnect the appliance from the
electricity supply.
Tilt back the appliance carefully. It is
recommended to ask another person
for help, who can keep the appliance
at this position safely.
Unscrew on the both sides adjustable
feet (2 pieces) and the fixing screws (2
pieces) of bottom door holder and the
far side screws (2 pieces) too.
