36
GB
Instructions for the Installer
Technical data
Model
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption (kWh/24h)
(kWh/year)
Energy class, according to EU standards
Freezing capacity (kg/24h)
Rising time (h)
Rated current (A)
Weight (kg)
Number of compressors
NDD 8230
Freezer: 44
Refrigerator: 190
Freezer: 44
Refrigerator: 186
545
140 4
604
0,62
227
A
3
19
0,8
51
1
Installing the appliance
Transportation, unpacking
It is recommended to deliver the
appliance in original packaging, in
vertical position considering the protec-
tive warning on packaging.
After each transportation the appliance
must not be switched on for approx. 2
hours.
Unpack the appliance and check if there
are damages on it. Report possible dam-
ages immediately to the place you bought
it. In that case retain packaging.
Cleaning
Remove every adhesive tape, which
ensure the parts not to move in the appli-
ance.
Wash the inside of the appliance using
lukewarm water and mild detergent. Use
soft cloth.
After cleaning wipe out the inside of the
appliance.
Placement
The ambient temperature has an effect
on the energy consumption and proper
operation of the appliance. When plac-
ing, take into consideration that it is prac-
ti- cal to operate the appliance between
ambient tem- perature limits according to
the climate class that is given in the chart
below and can be found in the data label.
Class of climate Ambient temperature
SN +10 ... +32 °C
N +16 ... +32 °C
ST +18 ... + 38 °C
If the ambient temperature goes below
the lower data the temperature of the
cooling compartment can go beyond the
prescribed temperature.
If the ambient temperature goes beyond
the upper data this means longer operat-
ing time of the compressor, breakdown in
the automatic defrosting increasing tem-
perature in the cooling compartment or
increasing energy consumption.
