704357
24
Zoom out
Zoom in
Previous page
1/43
Next page
21
Alarms and Limits
Setting and Changing Volume and Alarm Limits
NOTE: Avant 9600 alarm limits reset themselves to default values each time
the unit is powered up—unless the unit is in Patient Security mode.
In Patient Security mode, alarm limits and volumes cannot be
adjusted; they can only be viewed.
Reviewing, Setting, or Changing SpO
2
and/or Pulse Alarm Limits
1. Ensure that the Avant 9600 is on.
2. Press the Alarm Limits button.
Notice that the upper round LED is illuminated to the right of the Alarm
Limits button. This indicates the upper alarm limit, while the lower LED
indicates the lower alarm limit.
Notice that the current setting appears in the %SpO
2
display.
Continue to press the Alarm Limits button until the alarm limit you want
to change is displayed.
The Alarm Limits button can also be cycled to exit Set/Change mode, or
Set/Change mode will exit automatically after ten seconds with no
activity.
3. Ensure that the appropriate upper or lower Alarm Limit LED is illuminated,
and that the alarm limit you want to change is displayed.
4. Press the Plus (+) or Minus (-) buttons to adjust the values as desired.
Reviewing, Setting, or Changing Pulse and/or Alarm Volumes
1. Ensure that the Avant 9600 is on.
2. Press the Volume button once to change the alarm volume, or twice to change
the pulse volume.
After pressing the Volume button once, notice that the Alarm Volume
LED appears, and the current setting appears in the Pulse Rate display
area.
After pressing the Volume button twice, notice that the Pulse Volume
LED appears, and the current setting appears in the Pulse Rate display
area.
The Volume button can also be cycled to exit Set/Change mode, or Set/
Change mode will exit automatically after ten seconds with no activity.
3. Use the Plus (+) or Minus (-) buttons to adjust the alarm or pulse volumes as
desired.
NOTE: Review “Silencing Alarms” for information about permanently
silencing all alarms.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nonin Avant 9600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nonin Avant 9600 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nonin Avant 9600

Nonin Avant 9600 User Manual - German - 47 pages

Nonin Avant 9600 User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info