18
USER CONTROLS
Computer Mode
IMAGE-I
(COMPUTER MODE)
Brightness
Adjusting the brightness of the image.
■ Press the key to darken the image.
■ Press the key to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes the amount of
black and white in the image.
■ Press the key to decrease the contrast.
■ Press the key to increase the contrast.
Colour Temperature
Adjust the colour temperature. The range is from “0”to “4” The factory
default is “2”. With the higher temperature, the screen looks colder; with the
lower temperature, the screen looks warmer.
Zoom
■
Press the to magnify an image up to a factor of eight times on the
projection screen.
■ Press the to Diminish the zoom in image. Lowest available setting is 1/2-size.
Keystone (Keystone Correction)
Adjust image distortion caused by tilting projection. (±16 degrees)
White Segment
Use the white segment control to set the white peaking level of the DMD
chip.”0” stands for minimal peaking, and “10” stands for maximum peaking.
If you prefer a stronger image, adjust toward the minimum setting. For a
smooth and more natural image, adjust toward the minimum setting.
