Manual Nilfisk Supreme 150 (page 48 of 89) (Danish, Swedish, Finnish)

586820

Zoom out

Zoom in

1/89

46 Originlal Instructions

6.3 Supreme LCD Display

The Supreme LCD model has a display giving information

about the machine, Fig. 21.

Speed level

When the start button is pushed or the hose is

connected to the wall socket, the display will turn on

and show the speed level.

Dust bag/bag ﬁ lter indicator

When the dust bag/ﬁ lter symbol starts to ﬂ ash dur-

ing operation, the cleaner tells you that it is almost time

to clean the bag ﬁ lter and replace the dust bag. When it

is time to do so, symbol will be lit continuously. The dust

bag/ﬁ ler symbol will be lightened after every 20 operation

hours of the cleaner at the latest. If the symbol is lit, do

like this: Turn oﬀ the cleaner by the hose handle (remote

versions) or remove the suction hose from the wall inlet

(manual hose versions) or by pushing the on/oﬀ switch

on the display. Then check if the bag ﬁ lter/dust bag is

clogged. Replacement is described in chapters 7.1, 7.2,

7.3 and 7.4.

In switched oﬀ mode, re-set run time counter by holding

the start/stop button down until the dust bag indicator

goes out (after approx. 5 sec.).

Reduced airﬂ ow indicator - lit

The reduced airﬂ ow symbol on the display indi-

cates that the airﬂ ow through the vacuum cleaner

is reduced. After 30 seconds of operation with

reduced airﬂ ow, the vacuum motor will be shot down in or-

der to prevent damage to the motor. If the reduced airﬂ ow

symbol is lit and the motor has been shut down, do like

this: Check the bag ﬁ lter and dust bag (see chapters 7.1,

7.2, 7.3 and 7.4) to see if anything is blocking the airﬂ ow.

Remove the material causing the reduced airﬂ ow symbol

to indicate.

Service indicator

When the service symbol starts ﬂ ashing, the mo-

tor will run for one more hour before it stops/will

not start. The purpose of the service symbol is to inform

you that it is time to order service of the cleaner. When

the symbol is continuously lit, the run time counter in the

cleaner has counted that the allowed amount of run time

has passed. You must now contact an authorised service

workshop and let them perform a service of the cleaner

and to reset the run time counter.

Overheat indicator - ﬂ ashing

The overheat symbol indicates that the cleaner has

become overheated. The cleaner stops automati-

cally. Unplug the main power cord to reset the vacuum

cleaner and wait 5-10 minutes to allow the machine to

cool down. While you are waiting, check the hose, dust

bag and ﬁ lter to be sure that nothing is blocking the ﬂ ow

of air through the machine.

Signal indicator - ﬂ ashing

When the symbol is ﬂ ashing, the hose handle is out

of range and there is no connection to the cleaner.

The cleaner will automatically stop after 30 min. if

the hose handle or the cleaner has not been activated.

Fig. 21

Speed

Service

Dustbag/Filter

Wireless

Airflow

Temperature

Hello, I would like to know if any special connection is necessary for the air outlet and inlet of the supreme 150 model, or if with the 51 mm diameter tube. connects directly. The machine is completely sealed, it does not leak dust if it is installed inside a home? Thanks. Submitted on 9-11-2022 at 08:47
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk Supreme 150 in the language / languages: Danish, Swedish, Finnish as an attachment in your email.

The manual is 3,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk Supreme 150

Nilfisk Supreme 150 User Manual - English - 26 pages

Nilfisk Supreme 150 User Manual - German - 27 pages

Nilfisk Supreme 150 User Manual - French - 25 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk Supreme 150 Manual

Product: