Manual Nilfisk Supreme 150 (page 46 of 89) (Danish, Swedish, Finnish)

586820

Zoom out

Zoom in

1/89

44 Originlal Instructions

5 Vacuum unit Supreme 150 / Performer 150 / Supreme 250 / Performer 250 /

Supreme LCD assembly instructions

5.1 Fitting the wall bracket

Plan the positioning of the wall bracket so that there is

plenty of space above and below the area where the

vacuum unit is to be located. Make sure there is a mini-

mum of 200 mm free space below the dust container.

Mark the positions for all four screw holes with a pen or

similar. The diameter of the holes in the holder is 5 mm.

Select screws and, if necessary, wall plugs suitable for the

type of wall concerned. Drill the four screw holes.

Fit the wall bracket with the large opening pointing

downwards, see Fig. 15. Then screw the holder ﬁ rmly into

place.

5.2 Locating the vacuum cleaner on

the wall bracket

To facilitate the procedure, ﬁ rst remove the dust container.

Free the container by pulling both handles outwards.

Then remove the container from the machine.

To mount

the vacuum cleaner/motor chassis to the wall bracket - just

lower the chassis downwards so that the locking device of

the bracket will pass through the slot of the chassis

Fig. 16.

Make sure the corresponding bracket on the machine is

held ﬁ rmly in place by the wall bracket.

When removing the motor chassis from the wall bracket -

push the locking device towards you so it will release the

chassis and then lift the chassis up from bracket.

5.3 Connecting the machine

The machine is connected with the ﬂ exible suction hose

in the lower position and the exhaust pipe uppermost, Fig

17. The ﬂ exible hose is connected to the dust inlet at the

container of the cleaner.

Push the hose in to the inlet at the

cleaner until the hose locks. Press the button on the hose

inlet downwards in order to remove the suction hose.

The

ﬂ exible suction hose acts as an adapter connecting the

vacuum unit with the pipe system.

NB! These connections must not be glued in case the

unit is handed in for service.

Position the central vacuum cleaner so that the exhaust

pipe can be kept as short as possible, maximum. 5 me-

tres. Take the surroundings into consideration when posi-

tioning the exhaust. For this reason, you should always ﬁ t

a muﬄ er.

For additional information concerning the assembly

and installation of the pipe system and low-current

lead, please refer to the separate assembly instructions

supplied with the pipe package.

Push the hose in to the inlet at the cleaner until the hose locks.

Press the button on the hose inlet downwards in order to remove

the suction hose.

Exhaust

Inlet

Fig. 17

Fig. 15

Fig. 16

Hello, I would like to know if any special connection is necessary for the air outlet and inlet of the supreme 150 model, or if with the 51 mm diameter tube. connects directly. The machine is completely sealed, it does not leak dust if it is installed inside a home? Thanks. Submitted on 9-11-2022 at 08:47
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk Supreme 150 in the language / languages: Danish, Swedish, Finnish as an attachment in your email.

The manual is 3,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk Supreme 150

Nilfisk Supreme 150 User Manual - English - 26 pages

Nilfisk Supreme 150 User Manual - German - 27 pages

Nilfisk Supreme 150 User Manual - French - 25 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk Supreme 150 Manual

Product: