Manual Nilfisk Supreme 150 (page 49 of 89) (Danish, Swedish, Finnish)

586820

Zoom out

Zoom in

1/89

47Original Instructions

7 Filter and dust bags - Supreme 150 / Performer 150 / Supreme 250 /

Performer 250 / Supreme LCD

7.3 Replacing the dust bag

The machine is supplied with a dust bag. Replace the dust

bag in the following way:

1. Release the two handles clamped on to the dust con-

tainer. The handles are easily unlocked by lifting up the

handles until they come to a stop. When you pull the

handles outwards away from the cleaner, the container

is released. Fig. 22.

2. Lift oﬀ the container.

3. Shake the dust from the bag ﬁ lter. It may be advanta-

geous for the ﬁ lter to be installed in the container in

such a way that dust in the ﬁ lter can be shaken down

into the dust container.

4. Lift out the bag ﬁ lter.

5. Remove the dust bag by taking hold of the cardboard

stiﬀ ener and carefully pulling out the card and bag from

the container, Fig. 24. Fold down the perforated part of

the cardboard towards the opening of the bag in order

to prevent the bag contents to leak out.

6. Empty the container of dust.

7.1 Replacing the bag ﬁ lter

A bag ﬁ lter must always be installed in the dust container.

Clean the ﬁ lter in the following way:

1. Release the two handles clamping the dust container.

The handles are easily unlocked by lifting up the

handles until they come to a stop. When you pull the

handles outwards away from the cleaner, the container

is released. Fig. 22.

2. Do not remove the ﬁ lter from the container. Instead,

give the ﬁ lter a light shaking inside the container to

loosen dust from the ﬁ lter allowing it to fall into the

container. This is done by grasping the strap on the

ﬁ lter and quickly move the ﬁ lter up and down as shown

in Fig. 23.

3. Lift out the bag ﬁ lter. If a dust bag is being used - re-

move the dust bag. Then empty the container of any

remaining dust in a suitable place.

7.2 Fitting the bag ﬁ lter

Replace the bag ﬁ lter in the machine as follows:

1. Replace the cleaned/shaken bag ﬁ lter in the container.

Make sure the ﬁ lter support ﬁ ts into the inner edge

of the dust container properly. Check that the ﬁ lter is

ﬁ tted the right way up - the cloth handle on the ﬁ lter

should be visible.

2. Then replace the dust container with the bag ﬁ lter in

the cleaner’s vacuum unit.

3. Attach the container on the vacuum unit by lifting the

container back in place and pushing the handles back

in over the edge of the cleaner till you hear a click.

Push down the handles and ensure that the vacuum

unit and dust container are ﬁ tted together properly.

7.4 Fitting the dust bag

Replace the dust bag as follows:

1. Fit the dust bag’s card with a hole into the bag holder,

Fig. 25.

2. Replace the cleaned/shaken bag ﬁ lter in the container.

Make sure the ﬁ lter support ﬁ ts into the inner edge of

the dust container properly.

Check that the ﬁ lter is ﬁ tted the right way up - the cloth

handle on the ﬁ lter should be visible.

3. Replace the dust container on the vacuum unit. Close

the container on the vacuum unit by applying inward

pressure to the two handles to ensure the vacuum unit

and dust container are ﬁ tted together properly.

Fig. 22 Fig. 23

Fig. 25

Fig. 24

The Supreme 150 / Performer 150 / Supreme 250 /

Performer 250 / Supreme LCD can be run with or with-

out the installation of a dust bag - the choice is yours.

These products must though always be operated with

the bag ﬁ lter ﬁ tted in the cleaner.

Hello, I would like to know if any special connection is necessary for the air outlet and inlet of the supreme 150 model, or if with the 51 mm diameter tube. connects directly. The machine is completely sealed, it does not leak dust if it is installed inside a home? Thanks. Submitted on 9-11-2022 at 08:47
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk Supreme 150 in the language / languages: Danish, Swedish, Finnish as an attachment in your email.

The manual is 3,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk Supreme 150

Nilfisk Supreme 150 User Manual - English - 26 pages

Nilfisk Supreme 150 User Manual - German - 27 pages

Nilfisk Supreme 150 User Manual - French - 25 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk Supreme 150 Manual

Product: