787650

Nilfisk SC3500 Manual

26
Zoom out
Zoom in
Previous page
1/31
Next page
USER MANUAL
ENGLISH
23
1. Clean the steel or the aluminum squeegee, as shown in the
previous paragraph.
2. Check that the edges (E, Figure 23) of the front blade (C) and
the edges (F) of the rear blade (D) lay down on the same level,
along with their length; if necessary adjust their height
according to the following procedure:
x Remove the tie rod (G), disengage the fasteners (M) and
adjust the rear blade (D), then engage the fasteners (M) and
install the tie rod (G).
x Loosen the knobs (I) and adjust the front blade (C), then
3.
tighten the knobs.
Check the front blade (C) and rear blade (D) for wear, cuts
and tears; if necessary replace them according to the
following procedure. Check that the front corner (J) of the
rear blade (D) is not worn; if necessary overturn the blade to
replace the worn corner with an integral one. If the other
corners are worn too, replace the blade according to the
following procedure:
x Remove the tie rod (G), disengage the fastener (M) and
remove the retaining strip (K), then replace/overturn the rear
blade (D). Assemble the blade in the reverse order of
disassembly.
x Unscrew the knobs (I) and remove the retaining strip (L), then
replace front blade (C). Assemble the blade in the reserve
order of disassembly. After the blade replacement (or
overturning), adjust the height as shown in the previous step.
4. Connect the vacuum hose (A, Figure 24) to the squeegee.
5.
6.
Install the squeegee (B Figure 24) and screw down the knows
(C Figure 24).
If necessary, adjust the squeegee balance adjusting knob (D
Figure 24).
B
C
C
AD
Figure 23
Figure 24
D
L
I
M
D
M
B
K
C
I
E F
A
G
A
J
C
I
SQUEEGEE BLADE CHECK AND REPLACEMENT
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk SC3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk SC3500 in the language / languages: English as an attachment in your email.

The manual is 8.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info