Manual Nilfisk IVB2000 (page 48 of 72) (English, German, Dutch, French)

20231

Zoom out

Zoom in

1/72

USER MANUAL

12 32401131(1)2005-03 A

13 Emptying the dust container

(class H) – (Fig. 9)

The dust container emptying and servicing procedures

must be performed only by qualified technicians

wearing appropriate protective clothing. Do not operate

the vacuum cleaner if the filtering system is not installed

and working properly.

Take special care when emptying dust container

containing dust belonging to class H and M, wear a P3

mask and appropriate protective clothing.

Before emptying the dust container all the motors must

be stopped. Shake the filter repeatedly and wait for the

dust to deposit at the bottom of the container.

Release the container with the lever.

Start the motors again and carry out the following

steps:

Remove the container under the vacuum cleaner; close

the container cover “1”.

Remove the hermetically sealed ABS container “2”.

Insert a new empty ABS container into the main dust

container and reinstall the whole assembly into the

vacuum cleaner body.

Ensure that the additional dust container (if equipped)

is perfectly tight with the filtering unit. The disposal of

toxic substances inside the dust container must be

performed according to the law in force.

13.1 Using the vacuum cleaner with safety

bags for dust class “H”.

Installing the safety bag.

Place the safety bag for collecting toxic dust around the

container surfaces, with the connecting flange toward

the dust container inlet.

Insert the safety bag connecting flange into the dust

container inlet, as far as it will go – without any turning.

Fold the plastic bag over the dust container edge.

Pull out of the container edge, part of the plastic bag,

place it on and fasten it to the flange (before joining the

upper and lower portions of the vacuum cleaner).

When the dust bag is full

Leave the hose connected or close it with a cover.

After opening the vacuum cleaner, carefully detach the

plastic bag portion that seats on the edge of the

container, and apply a light pressure on both openings

to seal the bag.

Detach the back of the connection flange by pushing

strongly downwards on one of the corners, while

securely holding the union into its position. The

connecting hose becomes visible and can be bound by

simply pulling the fixing clamp.

After ensuring that there are no dust leaks,

disassemble the front portion of the flange from the

container inlet.

13.2 Dust bags (using plastic bags) (Fig. 7)

After opening the vacuum cleaner body, carefully

remove the plastic bag edge from the dust container

edge. Close the bag and remove it from the dust

container.

Insert a new bag inside the dust container. Ensure that

the bag covers both the container bottom and walls.

Pull the edge of the bag along the container edges and

make sure that the bag surface adheres to the

container walls.

13.3 Dust class “L”

The vacuum cleaners belonging to this class can be

used without a dust bag. In this case, make sure that

dust container emptying procedure is performed in a

special area and that the operator in charge of this

procedure wears appropriate protective clothing.

Do not throw away the plastic bag (safety bag) when it

contains toxic dust or harmful material. In this case, the

plastic bag must be handed over to the authorities in

possession of necessary permission to dispose of this

kind of waste material.

WARNING!

Inside the vacuum cleaner there can be

toxic dust.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk IVB2000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk IVB2000

Nilfisk IVB2000 User Manual - Portuguese, Spanish - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk IVB2000 Manual

Product: