20231
47
Zoom out
Zoom in
Previous page
1/72
Next page
USER MANUAL
32401131(1)2005-03 A 11
11 Using the vacuum cleaner in
environments with purified air
When the vacuum cleaner is used in environments with
purified air, where a high level of air purity is required,
or when it must be used for handling materials which
are hazardous for the health of the operator, it must
always be equipped with a HEPA filter.
This filter is located between the main filter and the
motor head. This enables the vacuum cleaner to reach
a MPP filtering efficiency of 99,995%, with particles
measuring up to 0,3 Micron. In this way it is possible to
retain the particles that are not retained by the main
filter.
This value has been measured according to the D.O.P.
method.
11.1 HEPA exhaust filter (IVT versions
only)
IVT 2000/3000 series models are equipped with an H
13 HEPA exhaust filter. When this filter is installed, the
vacuum cleaners can be used in environments with
purified air. The vacuum cleaner user is responsible for
checking that the vacuum cleaner is suitable to clean
the environment with purified air.
12 Dust class
The vacuum cleaner must be used according to the
safety standards.
Check for which dust class the vacuum cleaner is
suitable to work with (see the identification plate).
The vacuum cleaner cannot be used at the same time
for different dust classes.
12.1 Dust class “L”
(Low risk - established according to standard EN
60335-2-69).
This type of industrial vacuum cleaner is approved
according to the EN 60335-2-69 regulation for dust
class “L” and is suitable for collecting dry,
nonflammable and non-toxic dust with MAK values
above 1mg/m
3
. The purified air is then conveyed back
into the working area.
12.2 Dust class “M”
(Medium risk - established according to standard EN
60335-2-69).
This type of industrial vacuum cleaner is approved
according to the EN 60335-2-69 regulation for dust
class “M” and is suitable for collecting dry,
nonflammable and non-toxic dust with MAK values
above 0,1 mg/m
3
.
The purified air is then conveyed back into the working
area.
12.3 Dust class “H”
(High risk - established according to standard EN
60335-2-69).
This type of industrial vacuum cleaner is approved
according to the EN 60335-2-69 regulation for dust
class “H” and is suitable for collecting toxic, dry and
nonflammable dust with any MAK values, and for dry,
non-flammable, carcinogenic dust. The purified air is
then conveyed back into the working area.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk IVB2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk IVB2000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk IVB2000

Nilfisk IVB2000 User Manual - Portuguese, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info