20231
46
Zoom out
Zoom in
Previous page
1/72
Next page
USER MANUAL
10 32401131(1)2005-03 A
The filters must be replaced only in proper places (for
example in decontamination stations).
The filter replacement must be performed by qualified
personnel only, according to the instructions in the User
Manual.
Before replacement, the filter must be wrapped in a
special plastic bag.
Remove the vacuum cleaner motor head. Lift the filter
to remove it from the filtering unit.
Loosen the strap that retains the filter onto the retaining
ring.
Turn the filter upside down until the plastic straps “2”
are exposed. Place the filter in a plastic bag “3”; then,
cut the plastic straps to disengage the cage “4” from the
filter.
Seal the plastic bag containing the filter.
If the vacuum cleaner is equipped with an HEPA filter,
replace it proceeding as follows:
Open the strap retaining the motor head to the filtering
unit. Remove the head to reach the HEPA filter.
Remove the HEPA filter and replace it with a new one.
Reinstall the motor head and close the strap.
The removed filter must be wrapped in a plastic bag
and properly disposed of.
When replacing the main filter or the absolute filter take
special care and wear a P3 mask.
Do not throw away the filter if it is soiled with toxic dust
or harmful materials.
The filter must be handed over to the authorities in
possession of the necessary permission to dispose of
such waste.
When replacing the main filter or the HEPA filter take
special care, wear a P3 mask and appropriate
protective clothing.
The filter must be replaced with one of identical
characteristics, category and filtering surface. Failure to
comply with these instructions could jeopardize the
correct operation of the vacuum cleaner. Buy a new
filter having the same characteristics of the filter you
want to replace, and proceed as follows (Fig. 8).
Disassemble the old filter retainer and the retaining
ring, and mount them on to the new filter.
Install the filter cage “4” and fix the filter in the lower
part, by means of the appropriate straps “2”.
Insert the filter cage shaft into the filter shaker system
and tighten the screws.
Install the filtering unit covers.
Insert the filtering unit into the vacuum cleaner.
Tighten the strap that fixes the filtering unit to the
vacuum cleaner.
WARNING!
After assembly, reinstall the safety
screws.
NOTE
The absolute filter is toxic waste and must be
treated as such. The filter must be handed
over to one of the authorities in possession of
the necessary permission to dispose of such
waste.
WARNING!
Filter replacement is a serious matter.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk IVB2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk IVB2000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk IVB2000

Nilfisk IVB2000 User Manual - Portuguese, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info