609307

Nilfisk-ALTO MULTICLEANER 7-53 Manual

16
Zoom out
Zoom in
Previous page
1/29
Next page
17
MULTICLEANER 7-53
Original Instructions
By means of the arrows the user can get around in the menu
system. When the MULTICLEANER has been connected to the
power supply, it will be ready for operation after 30 sec. Then the
display will show a start-up screen, on which the user will be asked
to press arrow the right to initiate the MULTICLEANER.
Now the user has entered the main menu and it will be possible to
select between 3 menu options using arrows up and down.
• Auto-routines
This menu option is used for programming the washing
sequence.
• Manual control
This menu option can be used for controlling the
MULTICLEANER manually.
• Settings
This menu option can be used for making changes in the
configuration of the MULTICLEANER.
Submenu:
They user can enter and exit the submenus by pressing the arrows
to the right and the left. Using the arrows up and down, the values in
the submenus can be changed.
Washing routine:
Tower angle: Select the hole number in which the tower
is placed.
Arm angle: Select the hole number in which the arm is
placed.
Pen depth: Select pen depth measured from the fence
to the back wall of the pen.
Fence: Select washing height of fence.
Back wall: Select washing height of back wall.
Washing side: Select washing of either right, left or both
sides.
No. of washes: Select the number of washes you want to
have done.
Pause: Select pause between each washing.
Aisle washing: Select if you want washing of the aisle.
Start: By pressing arrow to the right, the settings
of the washing sequence are saved and the
MULTICLEANER will start up the washing
sequence.
Soap/disinfection option:
If this option has been mounted on the MULTICLEANER, it must be
activated in the menu "Settings" under "Soap". When this option is
activated, the soap and disinfection solution can be set in the menu
"Settings" and a soap application menu will appear in the washing
routine.
Obstacle detection option:
If this option has been mounted on the MULTICLEANER, it can be
activated and deactivated in the menu "Settings".
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO MULTICLEANER 7-53 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO MULTICLEANER 7-53 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info