31254
38
Zoom out
Zoom in
Previous page
1/56
Next page
- 38 -
Using the Scanner: Using the SA-20 STRIP FILM ADAPTER
Step 3—Remove the film
The jammed film will be visible in the feed mechanism at the
rear of the adapter. Grasp the film gently by both edges and
pull it slightly upwards, being careful not to damage the film.
Free the end of the film at the rear of the adapter first by pulling
the film upwards a little at a time. Do not pull on the film that
remains in the front part of the adapter, as the film could catch
in the mechanism and suffer damage.
Once the end of the film is free, pull the film slowly backwards
out of the adapter with one hand while guiding the free end
with the other, being sure that the film does not catch on the
adapter or other objects. Keep the angle at which film is pulled
from the adapter as low as possible to prevent damage to the
film.
Step 4—Close the adapter
Close the adapter and, with a coin or screwdriver, tighten the
screw on the top of the adapter until the top portion of the
adapter is securely in place.
When film protrudes from the film slot
Step 1—Remove the adapter from the scanner
Wait until the status LED glows steadily, then slide the adapter
from the scanner. If the status LED is flashing rapidly, close all
programs and turn off the computer, then turn off your scanner
and remove the adapter.
Step 2—Pull the film slowly out of the adapter
Grasp the film gently by both edges and pull the film slowly
forward out of the film slot.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon COOLSCAN_LS2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon COOLSCAN_LS2000 in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon COOLSCAN_LS2000

Nikon COOLSCAN_LS2000 User Manual - German - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info