31254
36
Zoom out
Zoom in
Previous page
1/56
Next page
- 36 -
Using the Scanner: Using the SA-20 STRIP FILM ADAPTER
Inserting film
To scan a film strip, grasp the film gently by the sides and slide
the it into the adapter’s film slot a short distance. The adapter’s
feed mechanism will be activated and the film will be fed into
the scanner automatically.
As is the case with mounted slides, strip film should be inserted
with the base up and the emulsion surface down. The film is in
the correct orientation if the frame numbers on the film are not
reversed. The film’s edges should be flat or curled slightly
downward. Do not use film which curls upwards or which is
curled more than 3 mm, as the film may jam or fail to scan
properly. Film for use in the scanner should fit in the gauge on
top of the adapter.
< 3 mm
Film will be ejected from the scanner automatically when the
scanner is turned on or when no operation is performed for
several minutes. Film can also be ejected using the software
provided with your scanner. For details of scanning operations,
refer to the User’s Guide or software reference manual.
Note: Due to varying degrees of curl in strip film, autofocusing
may not perform well when scanning the portion of the image
close to the front edge of the first frame. If you experience prob-
lems with autofocus, eject the film, turn it around so that the first
frame is now the last, then re-insert the film and scan the last
frame. You can also scan the frame in the MA-20 using the FH-2
strip-film holder (see “Using the MA-20 SLIDE MOUNT ADAPTER,”
above).
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon COOLSCAN_LS2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon COOLSCAN_LS2000 in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon COOLSCAN_LS2000

Nikon COOLSCAN_LS2000 User Manual - German - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info