31254
37
Zoom out
Zoom in
Previous page
1/56
Next page
- 37 -
Using the Scanner: Using the SA-20 STRIP FILM ADAPTER
Cautions
Do not attempt to insert film while scanning is in progress.
Do not remove the adapter or turn the scanner off when
there is film in the adapter. Use the driver software pro-
vided with your scanner to eject the film.
Do not leave film in the adapter for extended periods
Do not move the scanner while scanning is in progress.
Examine the film carefully prior to scanning. Film cannot be
used in the adapter if:
there is tape on the film
the film has been folded
the perforations have been torn
the film has been cut on an angle or torn
Film that cannot be used in the SA-20 can be scanned with
the MA-20 using the FH-2 film holder provided with your
scanner (see “Using the MA-20 SLIDE MOUNT ADAPTER,” above).
Film for use in the SA-20 must be clean and free from finger-
prints. If there is dirt on the film, damage to the film could
result. Before scanning, remove dust with a blower and
gently wipe off any finger prints with a soft, dry cloth.
What to do if film jams in the adapter
If film cannot be ejected from the scanner using the software
provided or does not eject automatically after ten minutes have
passed with no operation being performed, you will need to
remove the film from the adapter by hand. The process for
clearing jams is given below.
Note: If the SA-20 jams repeatedly, clean the adapter as de-
scribed in the following section.
When no film is visible in the film slot
Step 1—Remove the adapter from the scanner
Wait until the status LED glows steadily, then slide the adapter
from the scanner. If the status LED is flashing rapidly, close all
programs and turn off the computer, then turn off your scanner
and remove the adapter.
Step 2—Open the adapter
With a coin or screwdriver, loosen the screw on top of the
adapter and open the top cover.
1. Loosen screw
2. Open adapter
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon COOLSCAN_LS2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon COOLSCAN_LS2000 in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon COOLSCAN_LS2000

Nikon COOLSCAN_LS2000 User Manual - German - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info