641176

Niagara B264 Standalone Encoder Manual

26
Zoom out
Zoom in
Previous page
1/120
Next page
26
Interface speed: Configures the speed of the interface. The B264 streaming Ethernet
interfaces only support two manual modes: 100 Mb/s Full-Duplex and 1 Gb/s Full-
Duplex
.
o Auto-Negotiate: The Ethernet port will auto-negotiate the speed.
o 100 Mb/s Full-Duplex: Force the port to 100Mb/s Full-Duplex mode. Note that
the port will still perform auto-negotiation, but it will only advertise this mode.
o 1Gb/s Full-Duplex: restrict the operation to 1Gb/s Full-Duplex mode. Note that
the port will still perform auto-negotiation, but it will only advertise this mode.
Notes:
o If the B264 streaming Ethernet interfaces are connected to a 10 Mb/s switch, hub,
or network feed, link will not be established and the port will not recognize the
connection.
o If you select 100 Mb/s Full-Duplex or 1 Gb/s Full-Duplex and the
corresponding streaming Ethernet interface is connected to a switch, hub or
network feed that does not support the selected speed, link will not be established
and the port will not recognize the connection.
o If the interface speed is set to Auto-Negotiate, the streaming Ethernet port will
allow link to be established in 100 Mb/s Half-Duplex mode. However, this will
be flagged as a warning in the Network Statistics Interface Tab and in the Admin
Event Log Tab.
Network Configuration DNS Tab
The DNS tab allows manual configuration of up to two DNS servers. They do not need to be in
the same subnetwork as the streaming ports, as long as at least one default gateway is configured.
DNS is only used in conjunction with the RTMP output functionality. If you are not using
RTMP, there is no need to configure DNS servers.
DNS server configuration takes effect immediately, as soon as the information is entered.
Niagara Video has disabled support for 10 Mb/s modes, as these are unsuitable for MPEG transport over IP
applications. Moreover, any modern switch supports at least 100 Mb/s Full-Duplex.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niagara B264 Standalone Encoder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niagara B264 Standalone Encoder in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niagara B264 Standalone Encoder

Niagara B264 Standalone Encoder Quick start guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info