629274
12
Zoom out
Zoom in
Previous page
1/36
Next page
12 © 2015 UTC Fire & Security Americas Corporation, Inc. All rights reserved.
Wiring the NX-595E
Caution: Remove all power (AC and battery) to the NetworX security system
before proceeding. Failing to do so could result in possible damage to the product.
Terminal descriptions
Terminal
Description
1
Pos
Panel
Bus
Positive terminal
2
Com
Common terminal
3
Data
Data terminal on the NetworX panel
14
Z1
Additional
Zones
1
st
/ 3
rd
Zone
3.3K = Single EOLs
3.7K = Low zones
6.9K = High zones
15
Com
Common (-) return for Zone
loop
16
Z2
2
nd
/ 4
th
Zone
20
NC1
Relay 1
Normally closed
This relay can be controlled
from the UltraSync application
21
C1
Common
22
NO1
Normally open
23
NC2
Relay 2
Normally closed
This relay can be controlled
from the UltraSync application
24
C2
Common
25
NO2
Normally open
1. Connect the NX-595E's terminals POS, COM & DATA to the NetworX bus.
2. Connect one end of an Ethernet cable to the RJ45/Ethernet connector on the
NX-595E. Connect the other end of the Ethernet cable to an available Ethernet
port on the Internet router. The router should automatically assign the NX-595E
module an IP address when it is powered up.
3. If you are utilizing the output relay or additional zone functionality of the NX-
595E, connect the wiring to the appropriate terminals. Additional instructions
regarding output relay and zone functionality are included this manual.
4. Re-connect the power to the NetworX security system. You are now ready to
configure the NX-595E.
Note: In the unlikely event that the Internet router is not configured to automatically
assign an IP address, you will have to manually assign an IP address and network
settings in the NX-595E. Instructions to manually assign the network settings are
included in Appendix 1 at the end of this manual.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetworX NX-595E IP Communication Module at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-595E IP Communication Module in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info