629274

NetworX NX-595E IP Communication Module Manual

11
Zoom out
Zoom in
Previous page
1/36
Next page
© 2015 UTC Fire & Security Americas Corporation, Inc. All rights reserved. 11
Installing the NX-595E into the enclosure
Inside the NetworX enclosure, several 2-holed insertion points have been
constructed. This allows for either vertical or horizontal placement of the module.
Note: Notice that the insertion points have two sizes of holes - a larger hole and a
smaller hole.
Figure 1: The black plastic PCB guides have slots along the straight edge where
the PC Board will be seated. The curved side of the PCB guide fits into the larger
hole. The smaller hole on the raised protrusion in the NetworX panel is for the
screw.
Figure 2: Place the first black plastic PCB guide in the top insertion point with the
PCB slot facing downward. It does not require force. Insert one of the screws into
the smaller hole to secure it in place. The second PCB guide should be positioned
opposite of the first guide and placed in the lower insertion point, using the same
procedures described above. Once mounted, screw it in securely.
Figure 3: The PC board should slide freely in the slots of both guides.
Figure 1
Figure 2
Figure 3
Note: Record the 12 digit serial number of the NX-595E on the back of the
UltraSync Quick Reference Guide that is included in the product packaging. The
serial number is located on NX-595E product label attached to the PCB.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetworX NX-595E IP Communication Module at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-595E IP Communication Module in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info