Manual NetworX NX-148E LCD Keypad (page 19 of 24) (English)

629269

Zoom out

Zoom in

1/24

LCD KEYPAD 19

8. PARTITIONED SYSTEMS OPERATION

8a. MASTER MODE

The LCD keypad can be programmed to operate all the system partitions simultaneously. To set the

multi-partition mode, use the

 function as described on page 10, and answer "YES" to the

question "Master keypad?"

8b. “TEMPORARY” MASTER MODE

Press   [user code] to temporarily access the Master Mode. The keypad will revert back to its

assigned partition 60 seconds after a key press or 10 seconds without a key press. Press

# to exit.

8c. LIGHTS IN PARTITIONING MASTER MODE

# ARMED will illuminate if ALL partitions are armed.

# READY will illuminate if ALL

partitions are "Ready". The ready light will flash if all areas are

Ready or Force armable.

# FIRE will illuminate if ANY one area has a Fire condition. The fire light will flash if ANY area

has a Fire Trouble condition.

# POWER will illuminate if the primary power is connected to the NX8-E control panel. It will

flash if the system has a low standby battery condition.

# STAY will illuminate if ANY area has the stay light on.

# CHIME will illuminate if ANY partition is in the "Chime" mode.

# EXIT will illuminate if ANY area is timing an exit delay. It will flash if ANY area is in the last 10

seconds of an exit delay.

# BYPASS will illuminate if ANY area has a zone bypassed.

# CANCEL will flash during an abort delay time. If a code is entered followed CANCEL while

this light is flashing, all abortable reports will stop the communication process to the central

station. If a code is entered followed by CANCEL during or after an alarm report, the cancel

light will illuminate and remain constant until the central station has received the cancel

report.

# SOUNDER will sound if ANY area has the sounder on. This includes Entry delay, Exit delay,

Chime, and Alarm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-148E LCD Keypad in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

NetworX NX-148E LCD Keypad Manual

Product: