629269

NetworX NX-148E LCD Keypad Manual

21
Zoom out
Zoom in
Previous page
1/24
Next page
LCD KEYPAD 21
Operating Individual Areas in the Multi-Partition Mode
Enter a code that is a valid arm/disarm code for the area you wish to operate.
12-45-78 Disarm º
--3-56-- Arm º
Only the areas authorized by this user code will appear.
To toggle between the armed and disarmed states on an individual area, press [Area Number].
To operate an individual area, enter the number of the partition you wish to operate. The LCD keypad
will now operate as a single area keypad. All keys and functions entered will affect this individual
partition only. The lights and LCD display represent the status of that partition only. The word
"System" will be replaced with the word "Area #". The following is an example of this feature.
Press # to exit.
Area 5 Ready
Type code to arm
Area 5 is selected and Area 5 is ready to arm.
Press
# # to exit the individual partition mode.
Silencing Alarms in the Multi-Partition Mode
If the keypad is sounding an alarm or the siren is running, it can be silenced by entering a code with the
authority for the area(s) that are in alarm.
The EXIT , BYPASS and Alarm Memory function keys will only work if an individual partition
is selected.
9. SERVICE DISPLAY
The following message will be displayed periodically if the security system requires service.
Service Required
Type r2 for help
If you see this display, press . One or more of the
following fault messages will be displayed. Use the scroll keys
to browse through them. Press
# # to exit the service menu.
Control
Over Current
A short circuit of a control=s power supply has occurred.
Control
Siren Trouble
Open circuit has occurred on the bell or siren circuit.
Control
Box Tamper
(Optional) The Box Tamper circuit has activated.
Control
Phone Trouble
The Phone Line connected to the control is not operating
properly.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetworX NX-148E LCD Keypad at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-148E LCD Keypad in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info