Manual NetworX NX-148E LCD Keypad (page 5 of 24) (English)

629269

Zoom out

Zoom in

1/24

LCD KEYPAD 5

3b. BINARY DATA

The top line of the display will show the current location number on the left and the segment number on

the right. The data will be displayed on the bottom line with the numbers 1-8 in the first 8 characters. If

the number appears, this binary switch is on. If a minus sign (-) appears where the number should be, this

switch is off. Toggle numbers on or off using the corresponding number digit (1 to toggle 1; 8 to toggle 8).

When the numbers are in the desired state, enter . The data will be entered and the segment will be

incremented by 1. The data for this segment will now be displayed. Continue this process until the last

segment is programmed. When the last segment is reached, the keypad will prompt for the next location.

If you wish to exit this location before the last segment is reached, press #. This keypress will not save the

changes made to current segment, but will exit the location. “Shortcut Keys” shown in Numerical Data can

also be used for Binary Data.

3c. CHARACTER DATA

Character Data is used to enter LCD text when programming. (Refer to  feature on page 9 for

custom messages.) Custom zone descriptions and messages are stored character or ASCII data type.

This information is programmed using the bottom line of the display as a text editor. Once a character

location has been entered, the current data will be displayed on the bottom line. As is always the case,

the top line will display the current location and segment number. The five (5) function keys, as well as the

up and down arrow to the right of the display, are now used to edit the message prior to saving it back to

the location storage. An underscore (_) in the display indicates the current cursor location.

Shortcut keys:

 

      

Saves character or word; moves cursor to right

 CANCEL

      

Moves cursor to left.

  or 

      

Scrolls through available characters. (SeeTip)

(In Library Mode) Scrolls through available

words.

 STAY

      

Inserts blank space.

 CHIME

      

Deletes characters.

 EXIT

      

Accesses the Library (page 6)

 BYPASS

      

Makes the character “flash”.

(In Library Mode) Makes the entire word “flash”.

 #

      

Exits the edit mode.

Tip: An alternate method is to enter the 2-digit number found in Table 3-1 or Table 3-3 that

corresponds to the desired character. To accept this character, press . The character will remain and

the cursor will advance one space to the right.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-148E LCD Keypad in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

NetworX NX-148E LCD Keypad Manual

Product: