629269

NetworX NX-148E LCD Keypad Manual

4
Zoom out
Zoom in
Previous page
1/24
Next page
LCD KEYPAD
4
1. ENTERING THE PROGRAM MODE
ACTION RESULT
Enters the Program Mode.
Prompts for the programming code.
[Go To Program Code]
Factory Default is 
If the "Go To Program Code" is valid,
the LCD
screen will prompt for the device address to program.
You are now in the Program Mode and ready to
select the module.
2. SELECTING THE MODULE TO PROGRAM
Tip: All modules connected to the NX control panel are programmed through the keypad. So the module
you are programming should be the first entry.
#
Programs the NX Control Panel
is the module number of the control and # is
the entry key. Other module entry numbers can
be found in their corresponding manuals.
3. PROGRAMMING A LOCATION
Once the number of the module to be programmed has been entered, the LCD screen will prompt you for
a location number. Any location can be accessed by directly entering the desired programming location
followed by the pound [#] key. If the location entered is a valid location, the top line of the LCD screen will
display the location number on the left and the segment number on the right. The bottom line of the
display will show the current data. This data will be displayed and entered according to the type of data
used (numerical, binary, or character data). Follow the instructions below for each type of data.
3a. NUMERICAL DATA
The top line of the display will show the current location number on the left and the segment number on
the right. The data will be displayed on the bottom line. The hex equivalent will be shown in parenthesis.
To change the data in the current location, enter the number followed by . The data will be entered and
the segment will be incremented by 1. The data for this segment will now be displayed. Continue this
process until the last segment is programmed. When the last segment is reached, the keypad will prompt
you for the next location. If you wish to exit this location before the last segment is reached, press #. This
keypress will not save the changes made to current segment, but will exit the location.
Shortcut keys:
Previous location.
Same location.
Next sequential location.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetworX NX-148E LCD Keypad at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-148E LCD Keypad in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info