629269

NetworX NX-148E LCD Keypad Manual

7
Zoom out
Zoom in
Previous page
1/24
Next page
LCD KEYPAD 7
Table 3-4 AMERICAN SPANISH LIBRARY
ABAJO CONTACTO EXTERIOR JARDIN PRINCIPAL SOTANO
ALARMA CRISTAL FACHADA LABORATORIO PUERTA TALLER
ALMACEN DESPACHO FUEGO LATERAL RECEPCION TECHO
ARRIBA DETECTOR GARAJE LAVABO RECIBIDOR TERRAZA
AVERIA DISPARO GERENCIA MAGNETICO SABOTAJE TIENDA
AZOTEA DOBLE TECHNOLOGIA GOLPE OFICINA SALA TRASERO
BARRERA DORMITORIO HABITACION PANICO SALIDA VALLA
CAJA FUERTE EMERGENCIA HUMO PARED SALON VENTANA
CLARABOYA ENTRADA INFORMATICA PASILLO SENSOR VESTIBULO
COCINA ESTACIONAMIENTO INFRARROJO PERSIANA SILENCIOSA ZONA
COMEDOR ESTUDIO INTERIOR PLANTA SIRENA
4. LOADING FACTORY DEFAULTS
ACTION RESULT
Follow procedures on page 4 (Sections 1 and 2) and enter the Program Mode for the module to default.
#
Keypad will beep 3 times (loading is in progress).
The loading takes about 6 seconds.
To load the factory defaults for the LCD keypad,
enter the Program Mode from a different keypad
(does not have to be LCD keypad), and follow the
same procedures.
The two-line Custom and two-line Shutdown Messages will not be defaulted.
5. ENROLLING
For supervision purposes, the NetworX control panel has the ability to automatically find and store in its
memory the presence of all keypads, zone expanders, wireless receivers, and any other module
connected to the data terminal. This allows these modules to be supervised by the control panel. NOTE:
All modules should be connected and set to unique addresses prior to enrolling modules. To enroll the
modules, enter the Program Mode of the NetworX control panel. When the Program Mode is exited, the
control will enroll the devices. The enrolling process takes about 12 seconds, during which time the
"Service Required" will be displayed. Once a module is enrolled, if it is not detected by the control, the
"Service Required@ will be displayed.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetworX NX-148E LCD Keypad at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-148E LCD Keypad in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info