629278
30
Zoom out
Zoom in
Previous page
1/40
Next page
NX-10 User Manual 30
If you have a proximity reader installed, you can use a proximity card to activate various keypad functions by holding the card against
the reader. As a master user, you can add one or multiple cards to the system or delete existing cards. To do this, press OK and enter a
master code. Navigate with the
keys to NX-1701 Proximity Readers and press OK.
2. Enter the user number to be assigned to the card and press OK.
LED 1 on any enabled readers begins to flash.
3. Scan the card. If it is not already in the system, it is added and LED 1
stops flashing. If it is not in the system, the reader triple beeps.
4. To add multiple cards, navigate with the keys to Add Multiple
Cards and press OK. Carry out step 2 and scan the first card.
5. If the user card is not already in the system, it is added and LED 1
continues flashing, indicating that the next card can be scanned.
6. To delete a card, navigate with the keys to Delete One Card and
press OK. Carry out step 2 and scan the card.
7. The user card information for the re-entered user number is cleared
and LED 1 stops flashing.
Note: 40 seconds after you have finished scanning cards, all the readers in
the system are updated with the new card information.
1. To add one card, navigate with the keys to Add One Card and
press OK.
Adding and deleting cards
........
........
........
........
........
........
........
OK
Enter User No.
123
OK
OK
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetworX NX-10 - V3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-10 - V3 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NetworX NX-10 - V3

NetworX NX-10 - V3 Quick start guide - Dutch - 2 pages

NetworX NX-10 - V3 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info