519671
27
Zoom out
Zoom in
Previous page
1/78
Next page
NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
Installation and Configuration 2-7
v1.0, June 2007
Country/Region. Identifies the region where the WG602v4 can be used. It may not be
legal to operate the access point in a country/region other than the country/region for your
area. If your country or region is not listed, please check with your local government
agency or check our website for more information on which channels to use.
Channel/Frequency. Identifies which operating frequency will be used. It should not be
necessary to change the wireless channel unless you notice interference problems or if you
are setting up the WG602v4 near another access point. The available wireless channels are
between 1 and 11 in the US and Canada, and between 1 and 13 for Europe and Australia.
If using multiple access points, it is better if adjacent access points use different
channels to reduce interference. The recommended channel spacing between adjacent
access points is 5 channels (for example, use channels 1 and 6, or 6 and 11).
In “Infrastructure” mode, wireless stations normally scan all channels, looking for an
access point. If more than one access point can be used, the one with the strongest
signal is used. This only occurs when the various access points are using the same
SSID Mode. The default is g and b. You can change the mode to g or b only.
Data Rate. Shows the available transmit data rate of the wireless network. The possible
data rates supported are: 1 Mbps, 2 Mbps, 5.5 Mbps, 6 Mbps, 9 Mbps, 11 Mbps, 12 Mbps,
24 Mbps, 36 Mbps, 48 Mbps, 54 Mbps, and Best.The default is Best.
3. Click Apply to save any changes.
Now that you have finished the setup steps, you are ready to deploy the WG602v4 in your
network. If needed, you can now reconfigure the PC you used in step 1 back to its original TCP/IP
settings.
Note: You must set the Regulatory Domain. It may not be legal to operate the
wireless access point in a region other than one of those identified in this
field.
Tip: Before mounting the WG602v4 in a high location, first set up and test the WG602v4
to verify wireless network connectivity.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WG602v4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WG602v4 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WG602v4

Netgear WG602v4 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info