519671
29
Zoom out
Zoom in
Previous page
1/78
Next page
NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
Installation and Configuration 2-9
v1.0, June 2007
Logging Into the WG602v4
The NETGEAR WG602v4 54 Mbps Wireless Access Point can be configured remotely from
Microsoft Internet Explorer browser version 5.0 or above, or Netscape Navigator Web browser
version 4.78 or above, or Mozilla Firefox. You can log in to the WG602v4 in these two ways:
Using the IP Address of the WG602v4 (if DHCP client is disabled) or with a reserved IP
address assigned by your router (if DHCP client is enabled). Either one of these methods is the
most reliable.
Using the NetBIOS name of the WG602v4, which is not as reliable as using an IP Address.
IP Address Login
The default IP address of your wireless access point is 192.168.0.227. However, if you have
disabled DHCP client (fixed or static IP address), you can change the IP Address and IP Subnet
Mask of your wireless access point.
To connect to the WG602v4 using a fixed, static or reserved IP address:
1. Open a Web browser.
2. Enter the IP Address of WG602v4 into your browser (the default IP address is
http://192.168.0.227).
Note: If you are using the default IP subnet, the computer you are using to connect to the
WG602v4 should be configured with an IP address that starts with 192.168.0.x and
a Subnet Mask of 255.255.255.0; if you have changed the subnet of the wireless
access point, the computer your are using to connect must be within the same
subnet.
Figure 2-6
http://192.168.0.227
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WG602v4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WG602v4 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WG602v4

Netgear WG602v4 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info