519671
26
Zoom out
Zoom in
Previous page
1/78
Next page
NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
2-6 Installation and Configuration
v1.0, June 2007
IP Subnet Mask: 255.255.255.0
Gateway: 0.0.0.0
If your network has a requirement to use a different IP addressing scheme, you can make those
changes on this screen.
6. Click Apply to save any changes.
.
To configure your basic wireless settings:
1. From under the Setup menu, select Wireless Settings. The Wireless Settings screen will
display.
2. Enter or modify the wireless settings appropriate to your network:
Wireless Network Name (SSID). The SSID is the wireless network name. Enter a value
of up to 32 alphanumeric characters; the characters are case sensitive. In a setting where
more than one wireless network is present, using a different wireless network name allows
your to separate the traffic. Any device you want to participate in a particular wireless
network needs to use the SSID. The default SSID is: NETGEAR.
SSID Broadcast. If SSID Broadcast is disabled, only devices that have the correct SSID
can connect. The default is Enable.
Note: If you change the default subnet of the LAN IP address, you will be disconnected from the
Wireless AP user interface. To reconnect, reconfigure your computer with a static IP
address within the new LAN IP subnet.
Figure 2-5
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WG602v4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WG602v4 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WG602v4

Netgear WG602v4 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info