644631
6
Zoom out
Zoom in
Previous page
1/18
Next page
6
User manual
EN
INSTALLATION AND UNPACKING
UNPACKING
The equipment is delivered suitably packaged. When unpacking, carefully remove and check the integrity of the parts.
The packaging contains all the necessary information for handling the device.
INSTALLATION
•
Remove the robot from the packaging.
•
Place the robot on the ground.
•
Install the charging base and then gently immerse the robot in the pool. Wait until it has settled on the bottom and then, using
the hook provided, place the robot near the charging plate from the front side of the robot, which is identied by a recharging
sticker. If positioned correctly, the leds of the recharger will light up continuously.
•
Recharge the robot for 15 minutes before moving to the programming phase.
•
To program the robot, take it out of the water using the hook provided, place it on the ground and follow the programming
instructions. The programming only works with the robot out of the water.
•
Once programmed, immerse the robot in the water so that the work cycle can begin.
INSTALLATION OF CHARGING BASE
Remove the charging base from its packaging.
Place the charging base along the vertical wall of the pool.
Important
-
Position the steel side of the dissipator in contact with the pool wall.
-
Do not position the charging base on the bottom of the pool.
-
Make sure that the angle formed between the charging base and the opposite bottom is 90° and that the
area surrounding the recharger (at least 2 meters) is even and horizontal. Alternatively, use the provided
adapter for curves between the wall and bottom.
-
Preferably position the charger on the deeper end and, however, at a depth not greater than 5 meters.
Max. 5 mt
OK OK
NO NO
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NEMH2O Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NEMH2O Classic in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NEMH2O Classic

NEMH2O Classic User Manual - German - 18 pages

NEMH2O Classic User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info