644631
16
Zoom out
Zoom in
Previous page
1/18
Next page
16
User manual
EN
PROLONGED INACTIVITY AND RESTARTING
If the robot has not been used for a long period of time, a series of operations must be performed to guarantee proper functioning
at the time of reuse.
1. Remove the robot from the water when its batteries are fully charged. Usually, before the start of the rst daily work cycle.
Alternatively, disable the work times of the robot or the days of activity, and extract it after at least 4 hours of recharging.
2. Have routine maintenance performed by an authorised dealer. This is essential for keeping the robot in good working order.
The assistance usually includes the following operations:
•
thorough cleaning of the robot, turbines, lters and all the moving parts.
•
checking of robot functioning.
•
checking and, if necessary, replacement of any worn parts such as lters, turbines, brushes.
•
checking of the battery capacity.
•
if necessary, the dealer can download the operating statistics, check for any faults and load any new software updates.
3. Thorough cleaning of the robot, turbines, lters and all the moving parts.
4. Check for any worn or damaged parts, such as lters, turbines, brushes and if necessary, replace.
5. Store the robot in a protected and dry place with an ambient temperature between 10° and 20° C, out of reach of children, pets,
other foreign objects, etc. Store the robot at a temperature below 20°C in order reduce the automatic discharge of the batteries.
6. Disconnect the power plug from the power supply unit.
7. For correct maintenance of the batteries, recharge the robot at least every 5 months.
Restarting
Before restarting the robot after a long period of inactivity, proceed as follows.
1. Connect the plug of the power supply unit to the electrical outlet.
2. Reconnect the main electrical power supply.
3. Gently immerse the robot in the water and place it on the charging plate. If positioned correctly, the leds will light up continuously.
4. The robot is now ready for use.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NEMH2O Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NEMH2O Classic in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NEMH2O Classic

NEMH2O Classic User Manual - German - 18 pages

NEMH2O Classic User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info