Manual Navman FISH 4150 (page 18 of 25) (English)

470016

Zoom out

Zoom in

1/25

NAVMAN FISH 4100 Installation and Operation Manual

Correct installation is critical to the performance of

the NAVMAN fishfinder. There are two components

to install, the display unit and the transducer. It is

5 Installation

vital to read the entire installation section of this

manual and the documentation that comes with the

transducer before attempting installation.

5-1 What comes with this NAVMAN fishfinder?

Optional transducers

· Through hull Speed/Temperature transducer.

· Through hull Depth transducer.

· In hull Depth transducer.

Other options and accessories

· Flush mounting kit.

· Replacement paddle wheel.

· Sun cover.

· Adapter cable for through hull transducer.

· Carry bag.

· Transducer extension cable (FISH 4150 only).

Depth Repeater

Repeater for Depth, Speed, Water Temperature,

Battery Voltage (for FISH 4150 only).

Please consult your NAVMAN dealer for more

information.

Standard configuration

· FISH 4100 or FISH 4150 display unit.

· Power cable (the FISH 4100 power cable

incorporates the transducer cable).

· Mounting bracket.

· Warranty registration card.

· This manual.

· Transducer.

· Transducer Installation Manual.

· Screws.

5-2 Options and Accessories

Mounting the bracket

1. Select a position where the display head will be:

· at least 100 mm (4 in) away from the

compass.

· at least 300 mm (12 in) away from any

radio transmitter.

· at least 1.2 m (4 ft) away from any antenna.

· easy to read by the helmsman and crew

while underway.

· protected from physical damage during

rough sea passages.

· easy to access the 12 volt power source.

· convenient to route the transducer cables.

2. Fix the mounting bracket onto the boat using

the three stainless steel screws. Do not

overtighten the screws, as the bracket may not

rotate.

5-3 Mounting the NAVMAN Fishfinder Display Unit

3. Push the display unit onto the mounting

bracket and tighten it firmly using the knob on

the mounting bracket.

4. Attach the cables.

Note: There is also an optional flush mount kit

available. Please consult your NAVMAN dealer for

details.

Removing the NAVMAN fishfinder

The NAVMAN fishfinder can be removed after each

use for protection against the environment or security

reasons.

When removing the NAVMAN fishfinder, ensure that

the plugs left in the boat are not exposed to the

elements. Push the attached dust covers over the

exposed ends of the plugs. Keep the display unit in

a dry clean place such as the optional NAVMAN

carry bag.

Power cable

(FISH 4150 only)

Mounting

bracket

Transducer

Unit

Screws

sono in possesso di un navman fish 4150 e da un po di tempo non riesco piu a leggere perche non visualizza gli sritti quindi non riesco ad utilizarlo . Mi sapete dire cosa sara successo
Submitted on 31-12-2020 at 23:47
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4150 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4150

Navman FISH 4150 Usermanual and installation guide - German - 27 pages

Navman FISH 4150 Usermanual and installation guide - Dutch - 25 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Navman FISH 4150 Manual

Product: