470017
16
Zoom out
Zoom in
Previous page
1/25
Next page
NAVMAN FISH 4100 Installation and Operation Manual
16
KEEL OFFSET
Keel offset is the distance between the location of
the depth transducer and the point the displayed
depth is measured from.
Enter a keel offset value when the transducer is
located below the water surface but a display of total
water depth is required, or when the depth of water
below the boat's keel is required.
Press
or
to select KEEL OFFSET, then press
to display the keel offset box.
Negative values display the depth as measured from
a point below the transducer (e.g. keel). Positive
values display the depth as measured from a point
above the transducer (e.g. water surface).
Press
or
to increase or decrease the value.
Use this menu at installation time, to select the
language and to enter the keel offset value for the
boat.
Select MAIN MENU - SETUP - INSTALL to display
the menu. The FISH 4100 install menu is shown. An
extra option, CALIBRATION, is available on the FISH
4150 to calibrate water temperature and boat speed.
The FISH 4100 Install Menu is shown:
Press
or
to select an
option:
LANGUAGE
The following languages
are available: English,
French, Swedish, Italian,
Spanish, Portuguese,
Dutch, German and
Finnish.
Press
or
to highlight
the selected language,
then press
to save
and exit.
Select MAIN MENU - SETUP - LOG to display the
available options.
Press
or
to select
an option:
LOG
Selects which log is
displayed on the DATA
screen, TOTAL or TRIP.
Press
to choose
between TRIP or
TOTAL. Both logs are
retained in the NAVMAN
fishfinder but only the
selected log is
displayed.
ZERO TRIP LOG
Resetting the trip log will return the trip log value to
zero. The trip log is retained in the fishfinder memory
4-6 LOG menu (FISH 4150 only)
so it retains the distance value if the fishfinder is
switched off during a trip. Therefore, the trip log needs
to be reset manually each time the user wishes to log
a trip.
Press
or
to highlight ZERO TRIP LOG, then press
to select it. The message box “ZERO TRIP LOG
YES” appears.
Press
to select YES or NO. Then press
or
to reset the trip log and exit.
ZERO ALL LOGS
Resetting both logs will return both the trip log and
the total log values to zero.
Press
or
to highlight ZERO ALL LOGS, then
press
to select it. The message box “ZERO ALL
LOGS YES” appears.
Press
to select YES or NO. Then press
or
to exit.
4-7 INSTALL menu
Water surface
Depth of transducer
Enter positive values to display depth as measured from a point above the transducer (e.g. Water surface).
Enter negative values to display depth as measured from a point below the transducer (e.g. keel).
Negative value
Transducer
Note: Boat illustrated uses a through hull transducer
Positive value
Use Keel Offset either when the
transducer is located below the
water surface but a display of
total water depth is required, or
when depth of water below the
boat’s keel is required.
16


Need help? Post your question in this forum.

Forumrules
1

Forum

navman-fish-4100

Reset search

  • what does the low battery alarm mean on my fishinder Submitted on 21-7-2022 at 21:05

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH 4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4100 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4100

Navman FISH 4100 Usermanual and installation guide - German - 27 pages

Navman FISH 4100 Usermanual and installation guide - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info