470017

Navman FISH 4100 Manual

14
Zoom out
Zoom in
Previous page
1/25
Next page
NAVMAN FISH 4100 Installation and Operation Manual
14
Use the SETUP menu to customize the NAVMAN
fishfinder to suit the boat and individual
preferences.
On a FISH 4100 use the SETUP menu to:
· Specify the trigger settings for the alarms (4-1).
· Choose the depth units (4-2).
· Turn the key beep on or off (4-3).
· Choose the fish
symbol (4-4).
· Adjust the
display contrast
(4-5).
· Select language
and setup keel
offset (4-7).
Select MAIN MENU -
SETUP to display the
FISH 4100 SETUP
Menu. Press
or
to select an option:
4 SETUP menu
On a FISH 4150 use the SETUP menu to:
· Specify the trigger settings for the alarms (4-1).
· Choose the units for depth, temperature and speed
(4-2).
· Turn the key beep on or off (4-3).
· Choose the fish symbol (4-4).
· Calibrate the log, temperature and speed (4-6, 4-8).
· Select the Trip Log or
the Total Log (4-6).
· Zero the Trip Log or
zero all logs (4-6).
· Adjust the display
contrast(4-5).
· Select language, setup
keel offset and calibrate
speed and temperature
sensors (4-7, 4-8).
Select MAIN MENU - SETUP
to display the FISH 4150
SETUP Menu. Press
or
to select an option:
Select MAIN MENU - SETUP - ALARMS to display the
available alarms. Press
or to select an option.
Alarms can be enabled to
automatically detect certain
conditions, such as the
water being too shallow.
Trigger settings can be
defined to suit the boat and
individual preferences. The
FISH 4100 ALARMS menu
is shown:
The FISH 4150 has two
extra alarms, TEMP
VALUE and TEMP RATE.
The beeper cycle is different for some alarms. All of
the alarm symbols and beeper cycles on the FISH
4100 are shown:
4-1 ALARMS menu
When an alarm condition is met, then:
· The beeper sounds.
· The ALARMS menu is displayed on the screen
with the activated alarm symbol(s) flashing.
Press any key to acknowledge the alarm, stop the
beeping and remove the ALARMS menu. This does
not disable the alarm. The symbol will continue to
flash until the alarm condition is no longer present.
Note: The FISH ALARM gives only three short beeps.
Alarms automatically re-enable
The TOO SHALLOW, TOO DEEP and LOW
BATTERY alarms automatically re-enable when the
value moves outside the alarm trigger setting.
The TEMP VALUE alarm automatically re-enables
when the temperature is more than 0.45°F (0.25°C)
above or below the alarm trigger setting.
The TEMP RATE alarm automatically re-enables
when the rate of temperature change falls below the
trigger setting by more than 0.2°F (0.1°C) per minute.
Symbol Alarm Beeper Alarm condition is
Name Cycle met when:
Too
1
/
5
sec the depth is less than
Shallow the alarm trigger value
Too
1
/
2
sec the depth is greater
Deep than the alarm trigger
value
Fish 3 short an echo matches the
Alarm beeps profile of a fish
Low
1
/
2
sec the battery voltage is
Battery less than the alarm
trigger value
The alarm symbols and beeper cycles for the two
extra alarms on the FISH 4150 are shown:
Symbol Alarm Beeper Alarm condition is
Name Cycle met when:
Temp
1
/
2
sec the temperature equals
Value the alarm trigger value
Temp
1
/
2
sec the rate of change of
Rate temperature equals the
alarm trigger value
… 14 …


Need help? Post your question in this forum.

Forumrules
1

Forum

navman-fish-4100

Reset search

  • what does the low battery alarm mean on my fishinder Submitted on 21-7-2022 at 21:05

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH 4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4100 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4100

Navman FISH 4100 Usermanual and installation guide - German - 27 pages

Navman FISH 4100 Usermanual and installation guide - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info