493513
6
Zoom out
Zoom in
Previous page
1/15
Next page
IDENTIFICATION OF CONTROLS
FRONT PANEL
1 STANDBY LED: This indicator will light up amber when the C 426
is in standby state. When the C 426 is at ON state, this indicator will
illuminate blue. This indicator will extinguish itself when the power
cable is unplugged from the AC supply.
2 STANDBY BUTTON: Press this button to turn ON the C 426. The
Standby LED indicator will turn from amber to blue and illuminate the
VFD. Pressing the STANDBY button again turns the unit back to standby
mode.
3 FM/AM: Toggle [FM/AM] button to select AM or FM band.
4 FM MUTE/MODE: The front panel [FM MUTE/MODE] button is a dual-
purpose control. In the normal position, “FM ST and “FM MUTE” icons on
the VFD are lit; only the stations with a strong signal can be listened to,
and the noise between stations is muted.
Pressing the [FM MUTE/MODE] button again (“FM ST” and “FM MUTE”
icons on the VFD are extinguished) allows distant and potentially noisy
stations to be received. Noise is reduced if the FM station signal level
is less than the FM Stereo threshold (since mono FM is inherently less
noise prone) though at the sacrice of the stereo eect.
The “FM MUTE” status can be stored for individual presets.
5 BLEND: The NAD BLEND feature will allow you to reduce the amount of
noise and hiss but still retain some level of stereo separation, instead of
mono. The [BLEND] button toggles between engaging and disengaging
the BLEND feature. When engaged, “BLEND” is illuminated in the VFD;
“BLEND” is extinguished when not engaged.
The “BLEND” status can be stored for individual presets.
6 DISPLAY: Use this multifunction button to toggle between RDS PS,
RDS RT and station frequency in FM tuner mode. Refer also to the item
about VIEW RDS TEXT at the LISTENING TO AM/FM RADIO section of the
OPERATION page.
In combination with [MEMORY] button, [DISPLAY] button is also used in
deleting stored presets. Refer also to the item about DELETE A PRESET at
the LISTENING TO AM/FM RADIO section of the OPERATION page.
7 MEMORY: Press this button to store tuned AM or FM stations to the
C 426’s 40 preset-memory locations. One can store a mix of any AM or
FM stations to the 40 available presets.
In combination with [DISPLAY] button, [MEMORY] button is also used in
deleting stored presets. Refer also to the item about DELETE A PRESET at
the LISTENING TO AM/FM RADIO section of the OPERATION page.
8 PRESET/TUNE: Toggle [PRESET/TUNE] button to switch between
“Preset and Tune mode. Select TUNE mode (“TUNE” scrolls through the
VFD) or PRESET mode (“PRESET scrolls through the VFD).
9 REMOTE SENSOR: Point the TNR 1 remote control at the remote
sensor and press the buttons. Do not expose the remote sensor of the
C 426 to a strong light source such as direct sunlight or illumination.
If you do so, you may not be able to operate C 426 with the remote
control.
Distance: About 23 ft (7 m) from the front of the remote sensor
Angle: About 30° in each direction of the front of the remote sensor
10 VACUUM FLUORESCENT DISPLAY (VFD): Provide visual information
on the settings, conditions, status and other information relevant to the
currently tuned station.
1 2 3 4 5 6 7 8 9 10 11
6
ENGLISH FRAAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C 426 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C 426 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C 426

NAD C 426 User Manual - German - 14 pages

NAD C 426 User Manual - Dutch - 14 pages

NAD C 426 User Manual - French - 14 pages

NAD C 426 User Manual - Italian - 14 pages

NAD C 426 User Manual - Swedish - 14 pages

NAD C 426 User Manual - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info