493513
5
Zoom out
Zoom in
Previous page
1/15
Next page
INTRODUCTION
GETTING STARTED
WHAT’S IN THE BOX
Packed with your C 426 you will nd
· An AM loop antenna.
· A FM ribbon-wire antenna with balun.
· A detachable AC power cord.
· An audio cable connector (RCA-to-RCA lead).
· The TNR 1 remote control with 2 (two) AAA batteries.
· This owner’s manual version in CD-ROM.
SAVE THE PACKAGING
Please save the box and all of the packaging in which your C 426 arrived.
Should you move or otherwise need to transport your C 426, this is by far
the safest container in which to do so. We’ve seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to both
sides and behind), and that will provide a clear line of sight, within 23 feet/7
meters, between the C 426’s front panel and your primary listening/viewing
position—this will ensure reliable infrared remote control communications.
Avoid placing the unit in direct sunlight or near sources of heat and damp.
It is perfectly possible to stack the C 426 on top of other components.
QUICK START
In case you simply cannot wait to experience the performance of your
new C 426, we provide the following “Quick Start” instructions to get you
underway.
Please make all the connections to your C 426 with the unit unplugged. It is
also advisable to power down or unplug all associated components while
making or breaking any signal or AC power connections.
1 Use the RCA-to-RCA lead to connect the left and right output of the
C 426 to the tuner input of your amplier.
2 Connect AM and FM antenna.
3 Connect the supplied AC cord to the C 426 AC mains input and then
plug into an AC outlet. The Standby LED indicator embedded around
the bezel of the STANDBY button will illuminate amber.
4 Plug the AC mains plug also of your amplier into the AC outlet. Power
up your amplier and set it to the tuner input where the C 426 is
connected.
5 Press the front panel STANDBY button to turn ON the C 426. The
Standby LED indicator will turn from amber to blue and illuminate the
VFD.
6 Toggle front panel’s [FM/AM] button to select AM or FM band.
7 Toggle front panel’s [PRESET/TUNE] button to switch between “Preset”
and Tune mode. Select TUNE mode (“TUNE” scrolls through the VFD).
8 Rotate the [PRESET/TUNE] control knob to select desired station.
5
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C 426 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C 426 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C 426

NAD C 426 User Manual - German - 14 pages

NAD C 426 User Manual - Dutch - 14 pages

NAD C 426 User Manual - French - 14 pages

NAD C 426 User Manual - Italian - 14 pages

NAD C 426 User Manual - Swedish - 14 pages

NAD C 426 User Manual - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info