802097
45
Zoom out
Zoom in
Previous page
1/52
Next page
Symptom
Cause
Solution
Display is blank
- There is no power to the
unit
- Check for correct supply voltage at the
supply screw terminals (220 - 260V AC)
In ECO+ mode, the charge does
not start, the display is always
showing Waiting for
Surplus and the export power
is 0W
- Grid Sensor incorrectly
installed
- Faulty Grid Sensor
- No signal from (if
used)
- Check the grid sensor is connected to a CT
terminal in the or any CT input in the
- Check the Grid CT sensor is installed on the
correct cable (see CT Sensor Installation on
page 36)
- Check resistance of the sensor - it should be
around 200Ώ when not connected (remove
the sensor from the cable before testing
resistance)
- If using , check that the CT input has
been set to Grid in the settings (under
Linked Devices / Devices in the
Advanced Settings menu)
In ECO+ mode, the charge does
not start, the display is always
showing Waiting for
Surplus, yet the export power
is showing correctly
- Export Margin set too
high
- Check Export Margin setting (default is
0W)
Generation power is always
0kW
- Generation CT not
installed
- Install generation sensor and connect to one
of the CT inputs
- Alternatively, if there is no Generation CT,
the Generation and House consumption
figures can be hidden on the main screen by
changing the Icons setting in the Settings
/ Display & Sound menu
Installation Limit !
displayed
Display will show the phase(s)
that is(are) overloaded and the
prospective current that would
be drawn if the were
allowed to start charge at the
minimum current
- The measured Grid
Current is greater than
the Grid Limit set in the
- Check the Grid Limit setting
- Reduce the load in the property
- In a three phase installation, consider
rebalancing the property load across the
three phases
Installation Limit !
G100 displayed
- The Grid CT has become
disconnected or is not
clamped correctly around
the grid supply cable
- Check CT is installed correctly.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Myenergi Zappi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Myenergi Zappi in the language / languages: English as an attachment in your email.

The manual is 3.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info