802097
44
Zoom out
Zoom in
Previous page
1/52
Next page
After completing and checking the wiring of the supply and the current transformers (CTs), switch on the via
the circuit breaker. will start-up and the main screen will be presented after a few seconds.
If has been installed alongside another unit or another device, refer to Linking Devices (page
27) for guidance on pairing devices. Also refer to the instruction documentation for the other devices.
Before leaving site, it is important that a few checks are carried out, ensuring the sensors have been correctly installed
and are functional.
1.
Check that the time and date are correct and are displayed on the bottom left of the main screen. If they
are not present or are incorrect, set the correct time and date in the Other Settings/Time & Date
menu option.
2.
Check that the EV will charge in FAST mode.
3.
Check the Grid Power reading at the top right of the main screen is showing sensible readings and the
direction of power flow is as expected.
4.
With the EV plugged in, switch to ECO mode and check that the charge power is at minimum (about
1.4kW) OR that it is 'tracking' the surplus power (i.e. the Grid Power reading is 0.0kW)
5.
If a Generation CT has been installed, check that the generated power is shown in the top left of the
main screen. If the generation reading is missing, the most likely cause is the associated CT input is not
enabled see CT Config on page 24.
If a (!) symbol is displayed in the top left-hand corner then the generation CT needs to be reversed.
If the Grid Sensor is wired to a ensure the device settings are set correctly see Device Settings
on page 28.
Remember only one CT (or three phase set of CT’s) can be set to Grid
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Myenergi Zappi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Myenergi Zappi in the language / languages: English as an attachment in your email.

The manual is 3.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info