677940
7
Zoom out
Zoom in
Previous page
1/37
Next page
UPS Setting
01:
Output voltage
setting
02:
Programmable
outlets
enable/disable
03:
Programmable outlets
setting
04:
Maximum charger
current setting
05:
LCD display
direction setting
06:
Autonomy
limitation setting
07:
Battery total AH
setting
00:
Exit setting
200/208/220/230/240
110/115/120/127
(Default)
ENA/ DIS
0-999
1/2/4/6/8
RAC: Horizontal
TOE: Vertical
0-999/DIS
7-999
Steps for setting programmable outlet
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Before entering
setting mode, the UPS
should be in Stand-by
mode (off-charging)
and make sure the
battery is connected.
Press and hold the
“Selection” button for
3 seconds to enter
Setting mode
Press the “Up“ button (ON/MUTE) to switch to "02"
of program list. Then press “Enter“ button to enter
value setting of parameter 2. Press the “Up” button
to change the value to “ENA” to enable the
programmable outlet function. Then press “Enter”
button again to confirm the setting.
Press the Upbutton (ON/MUTE) again to
switch to "03" of program list. Then press
“Enter“ button for setting programmable outlet
time. Push “Up” button to change the value of
backup time according your demand. Then
press “Enter” to confirm the setting.
Press “Up“ button
(ON/MUTE) to switch
to "00" of program list.
Then press “Enter”
button to exit setting
menu.
Disconnect AC input
and wait until the LCD
display is off. The new
setting will be
activated when
turning on the UPS
again.
Operating Mode Description
ECO mode
Buck mode when AC is
normal.
Boost mode when AC is normal.
Battery mode
Standby mode
When the input voltage is within voltage
regulated range, UPS will power the output
directly from the mains. ECO is an abbreviation of
Efficiency Corrective Optimizer. In this mode,
when battery is fully charged, the fan will stop
working for energy saving.
When the input voltage is
higher than the voltage
regulation range but
lower than high loss
point, the buck AVR will
be activated.
When the input voltage is lower than the voltage
regulation range but higher than low loss point,
the boost AVR will be activated.
When the input voltage is lower than the
voltage regulation range but higher than low
loss point, the boost AVR will be activated.
When the input voltage is beyond the
acceptable range or power failure and alarm is
sounding every 10 seconds, UPS will backup
power from battery.
UPS is powered off
and no output supply
power, but still can
charge batteries.
MODEL
PM 1500 NetGuard LCD Line
PM 2000 NetGuard LCD Line
PM 3000 NetGuard LCD Line
CAPACITY
1500 VA / 1350 W
2000 VA / 1800 W
3000 VA / 2700 W
INPUT
Acceptable Voltage Range
81-145 VAC or 162-290 VAC
Frequency Range
60/50 Hz (auto sensing)
OUTPUT
Voltage Regulation (AC Mode)
110/115/120/127 VAC or 208/220/230/240 VAC
Voltage Regulation (Batt. Mode)
± 1.5%(before battery alarm)
Frequency Range (Batt. Mode)
50 Hz or 60 Hz ± 1 Hz
Current Crest Ratio
3:1
Harmonic Distortion
2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm)
Transfer Time
Typical 2-6 ms, 10ms max.
Waveform (Batt. Mode)
Pure Sine Wave
BATTERY
Standard
Model
Battery Type & Number
12 V/7 Ahx4
12 V/9 Ahx4
12 V/9 Ahx6
Charging Voltage
54.8 VDC ± 1%
54.8 VDC ± 1%
82.1 VDC ± 1%
Recharge Time
4 hours recover to 90% capacity
Long-run
Model
Charging Current
N/A
1A/2A/4A/8A
1A/2A/4A/8A
Charging Voltage
54.8 VDC± 1%
82.1 VD ± 1%
PHYSICAL
Standard
Model
Dimension, DXWXH (mm)
510 x 438 x 88
630 x 438 x 88
Net Weight (kg)
19.5
21.5
29.3
Long-run
Model
Dimension, DXWXH (mm)
N/A
410 x 438 x 88
110/115/120/127 VAC: 510 x 438 x 88
208/220/230/240 VAC: 410 x 438 x 88
Net Weight (kg)
11
110/115/120/127 VAC: 13.9
208/220/230/240 VAC: 11.9
ENVIRONMENT
Operating Humidity
0-90 % RH @ 0- 40°C (non-condensing)
Noise Level
Less than 45dB
*Product specifications are subject to change without further notice.
Specifications
WARNING: This is a category C2 UPS product. In a residential
environment, this product may cause radio interference, in which
case the user many be required to take additional measures.
WARNUNG: Dies ist eine USV der Klasse C2. In Wohnansiedlungen
kann dieses Erzeugnis Funkstörungen hervorrufen, dann muss der
Benutzer zusätzliche Maßnahmen ergreifen.
User Manual
PM 1500/2000/3000 NetGuard LCD Line Interactive IEC version: 1. 0
EN
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mustek PowerMust 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mustek PowerMust 3000 in the language / languages: English, German, French, Italian, Polish, Portuguese, Finnish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info